£25 to £50
Classic ATB Neon Yellow NOS Steel 580 mm Flat/Straight Handlebars
£26.25 £35.00
✓ Original bars - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping
Unbranded classic handlebars, most likely in production during the 1990s (yet still new & unused after all this time!). Made from steel and weighing in at 410 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.
OVERVIEW
Production Era - 1990s
Material - Steel
Weight - 410 g
Stock Code - D-HBF44C
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Width (outside to outside) - 580 mm
Bar Type - Flat/Straight
Clamp Size - 25.4 mm
Grip Diameter - 22.2 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest cm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.
Kalloy AL-001 ATB System NOS Classic 560 mm Flat/Straight Handlebars
£30.00
✓ Original bars - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping
Kalloy AL-001 handlebars, hailing from Taiwan and in production during the 1990s (yet still new & unused after all this time!). Made from aluminium and weighing in at 240 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.
OVERVIEW
Model ID - AL-001
Production Era - 1990s
Country - Taiwanese
Material - Aluminium
Weight - 240 g
Stock Code - D-HBF43C
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Width (outside to outside) - 560 mm
Bar Type - Flat/Straight
Clamp Size - 25.4 mm
Grip Diameter - 22.2 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest cm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.
Modolo O-Bone 6061 Alloy T6 Black NOS Classic 575 mm Flat/Straight Handlebars
£30.00 £40.00
✓ Original bars - produced in the 2000s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping
Modolo O-Bone handlebars, hailing from Italy and in production during the 2000s . Made from aluminium and weighing in at 182 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.
OVERVIEW
Production Era - 2000s
Country - Italian
Material - Aluminium
Weight - 182 g
Stock Code - D-HBF7C
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Width (outside to outside) - 575 mm
Bar Type - Flat/Straight
Clamp Size - 25.4 mm
Grip Diameter - 22.2 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest 5 mm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.
Modolo Raid Alloy Gold NOS Classic 580 mm Flat/Straight Handlebars
£26.25 £35.00
✓ Original bars - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping
Modolo Raid handlebars, hailing from Italy and in production during the 1990s (yet still new & unused after all this time!). Made from aluminium and weighing in at 131 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.
OVERVIEW
Production Era - 1990s
Country - Italian
Material - Aluminium
Weight - 131 g
Stock Code - D-HBF47C
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Width (outside to outside) - 580 mm
Bar Type - Flat/Straight
Clamp Size - 25.4 mm
Grip Diameter - 22.2 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest cm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.
Philippe NOS Vintage 540 mm Bullhorn/Pursuit Handlebars
£45.00
✓ Original bars - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping
Philippe handlebars, hailing from France and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 383 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.
If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!
OVERVIEW
Condition Notes - Some storage marks
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 383 g
Stock Code - D-HBF15V
NB - The shape of these looks like a porteur style swept-back bar, but the logos are positioned to suggest these are intended to be used as a bullhorn type bar. See photos for both options, the last 2 photos show the logo position if used as a swept-back bar.
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Width (outside to outside) - 540 mm
Bar Type - Bullhorn/Pursuit
Clamp Size - 25.4 mm
Grip Diameter - 23.8 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest 5 mm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.
Rito Blue Anodised NOS Classic 560 mm Flat/Straight Handlebars
£42.50 £50.00
✓ Original bars - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping
Rito handlebars, in production during the 1990s (yet still new & unused after all this time!). Made from aluminium and weighing in at 178 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.
OVERVIEW
Production Era - 1990s
Material - Aluminium
Weight - 178 g
Stock Code - D-HBF50C
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Width (outside to outside) - 560 mm
Bar Type - Flat/Straight
Clamp Size - 25.4 mm
Grip Diameter - 22.2 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest cm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.
Rito Purple Anodised NOS Classic 560 mm Flat/Straight Handlebars
£37.50 £50.00
✓ Original bars - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping
Rito handlebars, in production during the 1990s (yet still new & unused after all this time!). Made from aluminium and weighing in at 176 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.
OVERVIEW
Production Era - 1990s
Material - Aluminium
Weight - 176 g
Stock Code - D-HBF51C
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Width (outside to outside) - 560 mm
Bar Type - Flat/Straight
Clamp Size - 25.4 mm
Grip Diameter - 22.2 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest cm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.
Truvativ XR NOS/NIB Classic 580 mm Flat/Straight Handlebars
£27.50
✓ Original bars - produced in the 2000s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping
Truvativ XR handlebars, hailing from the United States and in production during the 2000s. Made from aluminium and weighing in at 170 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.
OVERVIEW
Production Era - 2000s
Country - American
Material - Aluminium
Weight - 170 g
Stock Code - D-HBF41C
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Width (outside to outside) - 580 mm
Bar Type - Flat/Straight
Clamp Size - 25.4 mm
Grip Diameter - 22.2 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest cm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.
Unbranded Chrome NOS Steel Vintage 490 mm Porteur Handlebars
£42.50 £50.00
✓ Original bars - in production from the 1960s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping
Unbranded vintage handlebars, most likely in production from the 1960s to the 1980s (yet still new & unused after all this time!). Made from steel and weighing in at 453 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.
If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!
OVERVIEW
Production Era - 1960s - 1980s
Material - Steel
Weight - 453 g
Stock Code - D-HBF16V
*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.
TECHNICAL INFO
Width (outside to outside) - 490 mm
Bar Type - Porteur
Clamp Size - 25.4 mm
Grip Diameter - 23.8 mm
Rise/Drop (ctc at ends) - 15 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest 5 mm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.
Unbranded Chrome Steel Vintage 510 mm Moustache/Randonneur Handlebars
£30.00 £40.00
✓ Original bars - in production from the 1960s to the 1970s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping
Unbranded vintage handlebars, most likely in production from the 1960s to the 1970s. Made from steel and weighing in at 448 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.
If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!
The bars have been checked, cleaned and graded as good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.OVERVIEW
Production Era - 1960s & 1970s
Material - Steel
Weight - 448 g
Stock Code - U-HBF31V
TECHNICAL INFO
Width (outside to outside) - 510 mm
Bar Type - Moustache/Randonneur
Clamp Size - 23.8 mm
Grip Diameter - 23.8 mm
Rise/Drop (ctc at ends) - 30 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.
USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.
Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.
-
▼HELP SECTION
-
Width - the total width at its widest point, from end to end, rounded to the nearest 5 mm.
Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.
Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.
Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.