£95.00
SIZING & CONDITION
Platform Size: | 29.5cm X 39cm |
Material: | Steel |
Mounts to: | Brake Bridge / Dropout Eyelets |
Condition: | Good (Little Rusty / Quality Repair On Stay) |
SHIPPING, TAXES & RETURNS
£95.00
SIZING & CONDITION
Platform Size: | 33cm X 38cm |
Material: | Steel |
Mounts to: | Fork Brake / Dropout Eyelets |
Condition: | Very Good |
SHIPPING, TAXES & RETURNS
£345.00
Material: | Wool | |
Condition: | Excellent | |
Cm | Inches | |
Pit to Pit (Laid Flat): | 58 | 23 |
Length (Down Back): | 69 | 27 |
|
|
|
BOTTOMS
|
||
Cm | Inches | |
Waist Circumfrence (Relaxed): | 88 | 35 |
Waist Circumfrence (Full Stretch): | 98 | 39 |
Full Length: | 105 | 41 |
Hem Circumfrence (Relaxed): | 18 | 7 |
Hem Circumfrence (Full Stretch): | 24 | 9 |
SHIPPING, TAXES & RETURNS
£325.00
Material: |
Wool
|
|
Condition: |
Excellent
|
|
Cm | Inches | |
Pit to Pit (Laid Flat): | 53 | 21 |
Length (Down Back): | 67 | 26 |
BOTTOMS | ||
Cm | Inches | |
Waist Circumfrence (Relaxed): | 70 | 28 |
Waist Circumfrence (Full Stretch): | 74 | 29 |
Full Length: | 104 | 41 |
Hem Circumfrence (Relaxed): | 18 | 7 |
Hem Circumfrence (Full Stretch): | 22 | 9 |
SHIPPING, TAXES & RETURNS
£20.00
Please check the diameter matches that of your frame, and refer to the table below for other sizings & condition: We measure all seatposts from the centre of the saddle rails to the bottom. 'Bullet-nose' style seatposts are measured from the top to bottom.
Please allow 6cm at the base of the seatpost to be safely inserted into the frame.
SIZING & CONDITION
Diameter: | 25.4mm |
Length (Centre of Rails to Bottom): | 132mm |
Condition: | Good (Bit Squashed But Fine Above Limit) |
SHIPPING, TAXES & RETURNS
£12.00
Classic steel seatpost in the traditional 'bullet nose' style, as found on vintage bikes from the 1940s, 50s, 60s etc. In very good condition, with a few marks as seen in the photos.
Diameter: 25.4mm |
Total Length: 160mm |
UK: £4.50 |
Europe: £8.50 |
Rest of World: £13.25 |
SHIPPING, TAXES & RETURNS
£10.00
Classic steel seatpost in the traditional 'bullet nose' style, as found on vintage bikes from the 1940s, 50s, 60s etc. In good condition, with some marks as seen in the photos , but still very presenteable.
Diameter: 25.4mm |
Total Length: 180mm |
UK: £4.50 |
Europe: £8.50 |
Rest of World: £13.25 |
SHIPPING, TAXES & RETURNS
£25.00
Please check the diameter matches that of your frame, and refer to the table below for other sizings & condition: We measure all seatposts from the centre of the saddle rails to the bottom. 'Bullet-nose' style seatposts are measured from the top to bottom.
Please allow 6cm at the base of the seatpost to be safely inserted into the frame.
SIZING & CONDITION
Diameter: | 25.4mm |
Length (Centre of Rails to Base): | 125mm |
Condition: | Very Good |
SHIPPING, TAXES & RETURNS
£125.00 £170.00
Please check the diameter matches that of your frame, and refer to the table below for other sizings & condition: We measure all seatposts from the centre of the saddle rails to the bottom. 'Bullet-nose' style seatposts are measured from the top to bottom.
Please allow 6cm at the base of the seatpost to be safely inserted into the frame.
SIZING & CONDITION
Diameter: | 26.4mm |
Length (Centre of Rails to Bottom): | 165mm |
Condition: | New Old Stock in Original Box |
SHIPPING, TAXES & RETURNS
£45.00
Please check the diameter matches that of your frame, and refer to the table below for other sizings & condition: We measure all seatposts from the centre of the saddle rails to the bottom. 'Bullet-nose' style seatposts are measured from the top to bottom.
Please allow 6cm at the base of the seatpost to be safely inserted into the frame.
SIZING & CONDITION
Diameter: | 26.4mm |
Length (Centre of Rails to Base): | 160mm |
Condition: |
Good
|
SHIPPING, TAXES & RETURNS
£25.00
Please check the diameter matches that of your frame, and refer to the table below for other sizings & condition: We measure all seatposts from the centre of the saddle rails to the bottom. 'Bullet-nose' style seatposts are measured from the top to bottom.
Please allow 6cm at the base of the seatpost to be safely inserted into the frame.
SIZING & CONDITION
Diameter: | 27.2mm |
Length (Centre of Rails to Base): | 180mm |
Condition: | Good |
SHIPPING, TAXES & RETURNS
£35.00
Please check the diameter matches that of your frame, and refer to the table below for other sizings & condition: We measure all seatposts from the centre of the saddle rails to the bottom. 'Bullet-nose' style seatposts are measured from the top to bottom.
Please allow 6cm at the base of the seatpost to be safely inserted into the frame.
SIZING & CONDITION
Diameter: | 26.4mm |
Length (Centre of Rails to Base): | 195mm |
Condition: | NOS (Shop Marks, Not Inserted) |
SHIPPING, TAXES & RETURNS
£110.00
Please check the diameter matches that of your frame, and refer to the table below for other sizings & condition: We measure all seatposts from the centre of the saddle rails to the bottom. 'Bullet-nose' style seatposts are measured from the top to bottom.
Please allow 6cm at the base of the seatpost to be safely inserted into the frame.
SIZING & CONDITION
Diameter: | 26.6mm |
Length (Centre of Rails to Base): | 210mm |
Condition: |
Very Good
|
SHIPPING, TAXES & RETURNS
£25.00
Please check the diameter matches that of your frame, and refer to the table below for other sizings & condition: We measure all seatposts from the centre of the saddle rails to the bottom. 'Bullet-nose' style seatposts are measured from the top to bottom.
Please allow 6cm at the base of the seatpost to be safely inserted into the frame.
SIZING & CONDITION
Diameter: |
26.8 / 27.0mm
|
Length (Centre of Rails to Base): |
200mm
|
Condition: | NOS (May Have Storage Marks, Not Inserted) |
SHIPPING, TAXES & RETURNS
£175.00 £225.00
Please check the diameter matches that of your frame, and refer to the table below for other sizings & condition: We measure all seatposts from the centre of the saddle rails to the bottom. 'Bullet-nose' style seatposts are measured from the top to bottom.
Please allow 6cm at the base of the seatpost to be safely inserted into the frame.
SIZING & CONDITION
Diameter: | 26.8mm |
Length (Centre of Rails to Bottom): | 185mm |
Condition: | New Old Stock in Original Box |
SHIPPING, TAXES & RETURNS
£20.00
TECHNICAL INFO & CONDITION
Bolt Fit - 5-Arm
Between Adjacent Holes (mm) - 84.6 mm
BCD - 144 BCD
Tooth Count - 52
Width - 3/32" (For Derailleur Gears)
Condition - Good
Weight - 80 grams
Era - 1970s, 1980s
Country - Unknown
SHIPPING, TAXES & RETURNS
£15.00
Most of our chainrings are used but we only keep ones with life left in them, and they are accurately graded depending on physical wear.
3/32" is used for double & triple chainsets but can also be used for single ring chainsets. 1/8" is generally used for track chainsets & some single chainsets too.
Please be sure to check that the BCD (Bolt Circle Diameter) matches that of your crankset, otherwise the chainring will not fit. If you need help measuring your BCD, good ol' Sheldon Brown will be glad to be of assistance here: http://www.sheldonbrown.com/gloss_bo-z.html
SIZING & CONDITION
Bolt Circle Diameter: | 136 BCD |
Tooth Count: | 26 Tooth |
Width: |
3/32"
|
Condition: |
Good
|
SKU: | CR120 |
SHIPPING, TAXES & RETURNS
£30.00
Most of our chainrings are used but we only keep ones with life left in them, and they are accurately graded depending on physical wear.
3/32" is used for double & triple chainsets but can also be used for single ring chainsets. 1/8" is generally used for track chainsets & some single chainsets too.
Please be sure to check that the BCD (Bolt Circle Diameter) matches that of your crankset, otherwise the chainring will not fit. If you need help measuring your BCD, good ol' Sheldon Brown will be glad to be of assistance here: http://www.sheldonbrown.com/gloss_bo-z.html
SIZING & CONDITION
Bolt Circle Diameter: | 74 BCD |
Tooth Count: | 28 Tooth |
Width: |
3/32"
|
Condition: |
New (Shop Marks)
|
SKU: | CR118 |
SHIPPING, TAXES & RETURNS
£70.00
Our hubs are graded depending on the quality of the cones & bearings, if you can feel any pitting we grade them accordingly. A good service will always improve the condition. Please make sure to check the spacing matches that of your frame.
SIZING & CONDITION
Hole Count (F/R): | 6/7 Speed in 32/32 Only | 8/9/10 Speed in 32/32 or 36/36 |
Axle Width (F/R): | 100/126mm for 6/7 Speed | 100/130mm for 8/9/10 Speed |
Condition: | New Old Stock |
Sprocket Fitting: | HyperGlide / Uniglide (8 Speed) |
SHIPPING, TAXES & RETURNS
£45.00
Our hubs are graded depending on the quality of the cones & bearings, if you can feel any pitting we grade them accordingly. A good service will always improve the condition. Please make sure to check the spacing matches that of your frame.
SIZING & CONDITION
Hole Count: | 32 |
Axle Width: | 100mm |
Condition: | Good |
SHIPPING, TAXES & RETURNS
£55.00
Our hubs are graded depending on the quality of the cones & bearings, if you can feel any pitting we grade them accordingly. A good service will always improve the condition. Please make sure to check the spacing matches that of your frame.
SIZING & CONDITION
Hole Count: | 32h |
Spacing: | 120mm |
Bearing Condition: | Excellent |
Sprocket Type: | Screw-On (Italian 1.378 x 24 tpi) |
SHIPPING, TAXES & RETURNS
£35.00
Our hubs are graded depending on the quality of the cones & bearings, if you can feel any pitting we grade them accordingly. A good service will always improve the condition. Please make sure to check the spacing matches that of your frame.
SIZING & CONDITION
Hole Count: | 32 |
Condition: | NOS |
Sprocket Fitting: | Screw-On Freewheel |
SHIPPING, TAXES & RETURNS
£60.00
Our hubs are graded depending on the quality of the cones & bearings, if you can feel any pitting we grade them accordingly. A good service will always improve the condition. Please make sure to check the spacing matches that of your frame.
SIZING & CONDITION
Hole Count: | 32h |
Spacing: | 126mm |
Bearing Condition: | Very Good |
Sprocket Type: | Shimano Uniglide 6 Speed Dura Ace |
SHIPPING, TAXES & RETURNS
£20.00
Most of our chainrings are used but we only keep ones with life left in them, and they are accurately graded depending on physical wear.
3/32" is used for double & triple chainsets but can also be used for single ring chainsets. 1/8" is generally used for track chainsets & some single chainsets too.
Please be sure to check that the BCD (Bolt Circle Diameter) matches that of your crankset, otherwise the chainring will not fit. If you need help measuring your BCD, good ol' Sheldon Brown will be glad to be of assistance here: http://www.sheldonbrown.com/gloss_bo-z.html
SIZING & CONDITION:
Bolt Circle Diameter: | 104 BCD |
Tooth Count: | 32 Tooth |
Width: |
3/32"
|
Condition: |
New
|
SKU: | CR122 |
£45.00
Our hubs are graded depending on the quality of the cones & bearings, if you can feel any pitting we grade them accordingly. A good service will always improve the condition. Please make sure to check the spacing matches that of your frame.
SIZING & CONDITION
Hole Count: | 36h |
Spacing: | 120mm |
Bearing Condition: | Very Good |
Sprocket Type: | Screw On (French: 1.366 x 25.4 tpi) |
SHIPPING, TAXES & RETURNS
£40.00
Our hubs are graded depending on the quality of the cones & bearings, if you can feel any pitting we grade them accordingly. A good service will always improve the condition. Please make sure to check the spacing matches that of your frame.
SIZING & CONDITION
Hole Count: | 36h |
Spacing: | 100mm |
Bearing Condition: | Excellent |
SHIPPING, TAXES & RETURNS