Weinmann
Weinmann Vintage Brake Levers
£35.00
These vintage Weinmann brake levers were produced in the 1980s and weigh in at 183 grams. They're designed to be used on flat/town handlebars with an outside diameter of 22 mm - 24 mm.
The brake levers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION:
Type - Flat/Town Bar
Cable Routing - Non-Aero
Clamp Size - 22 mm - 24 mm
Body Condition - Very Good
Hood Condition - Very Good
Weight - 183 grams
Era - 1980s
If buying from outside of the EU, please remember that there may be import duties to pay upon receipt. View full product details
Weinmann AG (early levers) Vintage Brake Levers
£45.00
Non-Aero cable routing allows the cables to come out of the top of the brake levers, aero routing sends the cables under the handlebar tape.
Most drop bar brake levers will have a clamp size of between 23.8 - 24.2mm and will fit most drop handlebars, the exception generally being older British & French handlebars that sometimes require a 22.2mm clamp size.
Flat bars (such as Risers, French Porteur bars, Moustache bars etc) will require the correct clamp size to match (usually either 22.2mm or 23.8mm).
Please check the photos & table below for sizings & condition.
TECHNICAL INFO & CONDITION:
| Cable Routing: | Non-Aero |
| Clamp Size: | 23.8mm - 24.2mm |
| Body Condition: | Good |
| Hood Condition: | N/A |
Weinmann AG Customised Front Brake Caliper and Lever Set Vintage Brake Set
£145.00
This vintage Weinmann brake set was produced in the 1970s / 1980s and weighs in at 153 grams. The caliper's designed to be fitted to bikes with external nut fixings, and with a brake drop between 44-48mm (measured from the centre of the brake bolt to the centre of the rim).
The brake set has been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION:
Brake Drop - 44-48mm
Fixing - External Nut
Body Condition - Very Good
Pad Condition - OK
Weight: - 153 grams
Era - 1970s / 1980s
If buying from outside of the EU, please remember that there may be import duties to pay upon receipt. View full product details
Weinmann AG Vainqueur 999 3rd Version Vintage Brake Calipers
£45.00
These vintage Weinmann AG Vainqueur 999 3rd Version brake calipers were produced in the 1960s and weigh in at 361 grams. They're designed to be fitted to bikes with external nut fixings, and with a brake drop between 65-80mm (measured from the centre of the brake bolt to the centre of the rim).
The brake calipers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts, even new old stock calipers will show signs of age from storage over the years (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION:
Brake Drop - 65-80mm
Fixing - External Nut
Body Condition - Good
Pad Condition - OK
Weight: - 361 grams
Era - 1960s
If buying from outside of the EU, please remember that there may be import duties to pay upon receipt. View full product details
Weinmann AG Vintage Brake Levers
£35.00
These vintage Weinmann brake levers were produced in the 1960s and weigh in at 151 grams. They're designed to be used on drop handlebars with an outside diameter of 23.8 mm.
The brake levers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION:
Type - Drop Bar
Cable Routing - Non-Aero
Clamp Size - 23.8 mm
Body Condition - Good
Hood Condition - No Hoods
Weight - 151 grams
Era - 1960s
If buying from outside of the EU, please remember that there may be import duties to pay upon receipt. View full product details
Weinmann AG Vintage Brake Levers
£40.00
These vintage Weinmann brake levers were produced in the 1960s and weigh in at 151 grams. They're designed to be used on drop handlebars with an outside diameter of 23.8 mm.
The brake levers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION:
Type - Drop Bar
Cable Routing - Non-Aero
Clamp Size - 23.8 mm
Body Condition - Very Good
Hood Condition - No Hoods
Weight - 151 grams
Era - 1960s
If buying from outside of the EU, please remember that there may be import duties to pay upon receipt. View full product details
Weinmann AG Vintage Brake Levers
£40.00
These vintage Weinmann brake levers were produced in the 1970s and weigh in at 164 grams. They're designed to be used on drop handlebars with an outside diameter of 23.8 mm - 24.2 mm.
The brake levers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION:
Type - Drop Bar
Cable Routing - Non-Aero
Clamp Size - 23.8 mm - 24.2 mm
Body Condition - Good
Hood Condition - No Hoods
Weight - 164 grams
Era - 1970s
If buying from outside of the EU, please remember that there may be import duties to pay upon receipt. View full product details
Weinmann Carlton Vintage Brake Levers
£40.00
Non-Aero cable routing allows the cables to come out of the top of the brake levers, aero routing sends the cables under the handlebar tape.
Most drop bar brake levers will have a clamp size of between 23.8 - 24.2mm and will fit most drop handlebars, the exception generally being older British & French handlebars that sometimes require a 22.2mm clamp size.
Flat bars (such as Risers, French Porteur bars, Moustache bars etc) will require the correct clamp size to match (usually either 22.2mm or 23.8mm).
Please check the photos & table below for sizings & condition.
TECHNICAL INFO & CONDITION:
| Cable Routing: | Non-Aero |
| Clamp Size: | 23.8 - 24.2mm |
| Body Condition: | OK |
| Hood Condition: | Poor |
Weinmann Early AG Vintage Brake Levers
£45.00
These vintage Weinmann brake levers were produced in the 1950s and weigh in at 162 grams. They're designed to be used on drop handlebars with an outside diameter of 23.5mm.
The brake levers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION:
Type - Drop Bar
Cable Routing - Non-Aero
Clamp Size - 23.5mm
Body Condition - Good
Hood Condition - No Hoods
Weight - 162 grams
Era - 1950s
If buying from outside of the EU, please remember that there may be import duties to pay upon receipt. View full product details
Weinmann Vainqueur 610 Vintage Centre Pull Brake Calipers
£35.00
✓ Original part - in production from the 1960s to the 1970s
✓ Suitable for historic cycling events such as L'Eroica
✓ Made in Switzerland
✓ Worldwide shipping
Weinmann Vainqueur 610 brake calipers, in production from the 1960s to the 1970s. Made from aluminium/steel and weighing in at 327 grams - pretty lightweight for a pair of brake calipers at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.
If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong brake calipers!
The brakes have been cleaned, thoroughly checked by one of our mechanics and graded as good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.OVERVIEW
Production Era - 1960s & 1970s
Country - Swiss
Material - Aluminium/Steel
Weight - 327 grams
Stock Code- U-CP10V
TECHNICAL INFO
Brake Type - Centre Pull
Brake Drop - 60 mm - 70 mm
Brake Fixing - External Hex Nut
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the EU please remember that there may be import duties to pay upon receipt.
Weinmann Vintage Brake Levers
£35.00
Non-Aero cable routing allows the cables to come out of the top of the brake levers, aero routing sends the cables under the handlebar tape.
Most drop bar brake levers will have a clamp size of between 23.8 - 24.2mm and will fit most drop handlebars, the exception generally being older British & French handlebars that sometimes require a 22.2mm clamp size.
Flat bars (such as Risers, French Porteur bars, Moustache bars etc) will require the correct clamp size to match (usually either 22.2mm or 23.8mm).
Please check the photos & table below for sizings & condition.
TECHNICAL INFO & CONDITION:
| Cable Routing: | Non-Aero |
| Clamp Size: | 23.8mm - 24.2mm |
| Body Condition: | Good |
| Hood Condition: | N/A |