All Tagged "test" Page 22

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Crank Thread - 22 mm is the standard thread for almost all cotterless cranks, the only exceptions are some Stronglight cranks made up until the early 1980s, and Specialites T.A. Campagnolo produced some self-extracting crank bolts with covers that had a reverse thread.

View full product details

Olympic Cursa / Nisi Vintage Tubular Rear Wheel

£47.50 £95.00

All our wheels come professionally serviced, including tension check, truing & hub servicing where required. Please refer to the detailed photographs & information below for sizing & condition.

NB: Full size tubulars only come in one size. They are often referred to as 28", but some people call them 27" or 700c.

SIZING & CONDITION:

Hub:	Olympic Cursa
Rim:	Nisi
Wheel Size:	Standard Sprint/Tubs (28"/700c/27")
Hole Count:	36h
Rear Spacing:	120mm
Bearing Condition:	Excellent
Rim Wear:	Medium
Sprocket Type:	Screw-On (Italian 1.378 x 24 tpi)

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, normally within 2-3 days, but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

OMAS 'Big Sliding' / NISI Solidial Vintage Front Wheel

£40.00 £80.00

All our wheels are fully checked over before leaving the shop. All wheels are trued and cones adjusted where needed. Please refer to the detailed photographs & information below for sizings & detail of condition.

SIZING & CONDITION

Hub:	Omas 'Big Sliding'
Rim:	Nisi Solidial
Size:	28"
Hole Count:	28
Axle Spacing:	100mm
Bearing Condition:	Very Good
Rim Wear:	Medium

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, normally within 2-3 days, but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Omas / Mavic Monthlery Pro Vintage Tubular Rear Track Wheel

£62.50 £125.00

All our wheels come professionally serviced, including tension check, truing & hub servicing where required. Please refer to the detailed photographs & information below for sizing & condition.

NB: Full size tubulars only come in one size. They are often referred to as 28", but some people call them 27" or 700c.

SIZING & CONDITION:

Hub:	Omas Double Fixed
Rim:	Mavic Monthlery Pro
Wheel Size:	Standard Sprint/Tubs (28"/700c/27")
Hole Count:	36
Rear Spacing:	116mm
Bearing Condition:	Excellent
Rim Wear:	Light
Sprocket Type:	Double Track Fixed

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, normally within 2-3 days, but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Orange & Black - Vintage Woollen Style Cycling Jersey

£27.00 £45.00

Our jerseys have been sized to be a snug fit. If you prefer a more relaxed fit we suggest going up a size.

Below you'll find precise measurements of the garment when laid flat so you can compare against your favourite fitting jersey. Please make sure to check the length as well as the chest measurement.

The chest is measured across the front only, from armpit to armpit at the seam. The length is measured down the back only, from top of collar to bottom of hem.

Size:	Small (34 - 37" Chest)
Material:	100% Acrylic
Condition:	Very Good

	Cm	Inches
Pit to Pit (Laid Flat):	43	17
Length (Down Back):	62	24

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, normally within 2-3 days, but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Outback 1025 NOS Classic Black Saddle Bag

£19.00 £20.00

✓ Original saddle bag - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Outback 1025 saddle bag (or seat pack if you prefer), hailing from Taiwan and in production during the 1990s (yet still new & unused after all this time). An excellent choice for classic bikes, but great for bikes of the non-classic variety too!

OVERVIEW

Condition - New Old Stock*
Model ID - 1025
Production Era - 1990s
Country - Taiwanese
Material - Nylon / Plastic
Weight - 156 g
Stock Code - D-BAG-S25C

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Colour* - Black
Fixing Type - Quick Release (Supplied)
Dimensions (L x W x D) - 16.5 x 11 x 6 cm

*The colour description is just a guide, please check the photos too as we make sure these are as close to the true colour as possible.

▼SHIPPING, TAXES & RETURNS: We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

View full product details

Outback 1047 NOS Classic Black Saddle Bag

£19.13 £23.00

✓ Original saddle bag - in production from the 1990s to the 2000s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Outback 1047 saddle bag (or seat pack if you prefer), hailing from Taiwan and in production from the 1990s to the 2000s (yet still new & unused after all this time). An excellent choice for classic bikes, but great for bikes of the non-classic variety too!

OVERVIEW

Condition - New Old Stock*
Model ID - 1047
Production Era - 1990s & 2000s
Country - Taiwanese
Material - Cotton / Plastic
Weight - 190 g
Stock Code - D-BAG-S2C

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Colour* - Black
Fixing Type - Quick Release (Supplied)
Dimensions (L x W x D) - 17 x 11 x 7 cm

*The colour description is just a guide, please check the photos too as we make sure these are as close to the true colour as possible.

▼SHIPPING, TAXES & RETURNS: We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

View full product details

Panaracer Cinder Black NOS/NIB Classic 26 x 2.1" MTB Folding Tyres

£71.25 £95.00

✓ Original pair of tyres - produced in the 2000s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping

Panaracer Cinder folding tyres, hailing from Japan and in production during the 2000s. Made from rubber and weighing in at 1368 grams (the weight and price displayed are for a pair of tyres). A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.

NB: If mounted in the photos this is for illustrative purpose only, any wheels or rims shown are not included.

OVERVIEW

Condition - New Old Stock - In Original Packaging*
Production Era - 2000s
Country - Japanese
Material - Rubber
Weight - 1368 g
Stock Code - D-TYP-F7C

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 26 x 2.1"
Bike Type - MTB
ISO Diameter - 559 mm (26")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Size - this is the manufacturer’s sizing and must match the size or your wheels. This can be confusing as tyres have had different sizing systems over the years, and there are many (sometimes conflicting) sizes available. For this reason it’s important to check the ISO diameter too for clarification, especially for 26” wheels.

Bike Type - the type of bike the tyres were designed to be used on. Road tyres will generally be narrow with minimal tread, touring tyres wider with a bit more grip in the tread, and cyclocross & MTB tyres wider still (especially the latter), with a much more pronounced tread pattern.

ISO Diameter - this relates to the diameter of the wheel rims at the point where the tyres are seated (bead seat diameter). This is a universal measurement, often displayed on tyres as 28-622 or similar, 28 referring to the tyre width and 622 being the ISO diameter in millimetres.

TPI - stands for threads per inch and refers to the thread count of the tyre casings. A high thread count usually means more supple and lighter tyres, this can be anything as high as 320 tpi. We can’t always provide this information however, as it’s not always possible to know for sure.

View full product details

Panaracer Dart Classic Front Black/Skin NOS Classic 26 x 2.1" MTB Tyre

£34.00 £40.00

✓ Original tyre - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Panaracer Dart Classic tyre, hailing from Japan and in production during the 1990s (yet still new & unused after all this time). Made from rubber and weighing in at 665 grams (the weight and price displayed are for one tyre, if we have more in stock you'll be able to add them to your basket). A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.

NB: If mounted in the photos this is for illustrative purpose only, any wheels or rims shown are not included.

OVERVIEW

Condition - New Old Stock*
Production Era - 1990s
Country - Japanese
Material - Rubber
Weight - 665 g
Stock Code - D-G4-TY-R57C

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 26 x 2.1"
Bike Type - MTB
ISO Diameter - 559 mm (26")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

This product complies with the EU General Product Safety Regulation (GPSR). Professional installation and regular inspections are recommended. Due to the product's age, extra care should be taken during use.

Product Manufacturer - Panaracer Corporation, 250 Isou, Hikami-cho, Tamba City, Hyogo 6693464, Japan

EU Authorised Representative - Global Trade Department NI Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast BT9 6AG, Northern Ireland

Size - this is the manufacturer’s sizing and must match the size or your wheel. This can be confusing as tyres have had different sizing systems over the years, and there are many (sometimes conflicting) sizes available. For this reason it’s important to check the ISO diameter too for clarification, especially for 26” wheels.

Bike Type - the type of bike the tyre was designed to be used on. Road tyres will generally be narrow with minimal tread, touring tyres wider with a bit more grip in the tread, and cyclocross & MTB tyres wider still (especially the latter), with a much more pronounced tread pattern.

ISO Diameter - this relates to the diameter of the wheel rim at the point where the tyre is seated (bead seat diameter). This is a universal measurement, often displayed on tyres as 28-622 or similar, 28 referring to the tyre width and 622 being the ISO diameter in millimetres.

TPI - stands for threads per inch and refers to the thread count of the tyre casing. A high thread count usually means a more supple and lighter tyre, this can be anything as high as 320 tpi. We can’t always provide this information however, as it’s not always possible to know for sure.

View full product details

Panaracer Duster Pro Compe Front Black/Skin NOS/NIB Classic 26 x 1.95" MTB Folding Tyre

£29.25 £32.50

✓ Original tyre - produced in the 1990s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping

Panaracer Duster Pro Compe folding tyre, hailing from Japan and in production during the 1990s (yet still new & unused after all this time). Made from rubber/kevlar and weighing in at 540 grams (the weight and price displayed are for one tyre, if we have more in stock you'll be able to add them to your basket). A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.

NB: If mounted in the photos this is for illustrative purpose only, any wheels or rims shown are not included.

OVERVIEW

Condition - New Old Stock - In Original Packaging*
Production Era - 1990s
Country - Japanese
Material - Rubber / Kevlar
Weight - 540 g
Stock Code - D-G4-TY-F27C

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 26 x 1.95"
Bike Type - MTB
ISO Diameter - 559 mm (26")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

This product complies with the EU General Product Safety Regulation (GPSR). Professional installation and regular inspections are recommended. Due to the product's age, extra care should be taken during use.

Product Manufacturer - Panaracer Corporation, 250 Isou, Hikami-cho, Tamba City, Hyogo 6693464, Japan

EU Authorised Representative - Global Trade Department NI Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast BT9 6AG, Northern Ireland

Size - this is the manufacturer’s sizing and must match the size or your wheel. This can be confusing as tyres have had different sizing systems over the years, and there are many (sometimes conflicting) sizes available. For this reason it’s important to check the ISO diameter too for clarification, especially for 26” wheels.

Bike Type - the type of bike the tyre was designed to be used on. Road tyres will generally be narrow with minimal tread, touring tyres wider with a bit more grip in the tread, and cyclocross & MTB tyres wider still (especially the latter), with a much more pronounced tread pattern.

ISO Diameter - this relates to the diameter of the wheel rim at the point where the tyre is seated (bead seat diameter). This is a universal measurement, often displayed on tyres as 28-622 or similar, 28 referring to the tyre width and 622 being the ISO diameter in millimetres.

TPI - stands for threads per inch and refers to the thread count of the tyre casing. A high thread count usually means a more supple and lighter tyre, this can be anything as high as 320 tpi. We can’t always provide this information however, as it’s not always possible to know for sure.

View full product details

Panaracer Pasela Black/Skin Classic 27 x 1" Touring Tyres

£33.25 £35.00

✓ Original pair of tyres - produced in the 1990s
✓ Thoroughly checked over
✓ Worldwide shipping

Panaracer Pasela tyres, hailing from Japan and in production during the 1990s. Made from rubber and weighing in at 560 grams (the weight and price displayed are for a pair of tyres). A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.

The tyres have been thoroughly checked and graded as good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.

OVERVIEW

Condition - Good
Production Era - 1990s
Country - Japanese
Material - Rubber
Weight - 560 g
Stock Code - U-G4-TYP-R79C

TECHNICAL INFO

Size - 27 x 1"
Bike Type - Road/Touring
ISO Diameter - 630 mm (27")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

This product complies with the EU General Product Safety Regulation (GPSR). Professional installation and regular inspections are recommended. Due to the product's age, extra care should be taken during use.

Product Manufacturer - Panaracer Corporation, 250 Isou, Hikami-cho, Tamba City, Hyogo 6693464, Japan

EU Authorised Representative - Global Trade Department NI Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast BT9 6AG, Northern Ireland

Size - this is the manufacturer’s sizing and must match the size or your wheels. This can be confusing as tyres have had different sizing systems over the years, and there are many (sometimes conflicting) sizes available. For this reason it’s important to check the ISO diameter too for clarification, especially for 26” wheels.

Bike Type - the type of bike the tyres were designed to be used on. Road tyres will generally be narrow with minimal tread, touring tyres wider with a bit more grip in the tread, and cyclocross & MTB tyres wider still (especially the latter), with a much more pronounced tread pattern.

ISO Diameter - this relates to the diameter of the wheel rims at the point where the tyres are seated (bead seat diameter). This is a universal measurement, often displayed on tyres as 28-622 or similar, 28 referring to the tyre width and 622 being the ISO diameter in millimetres.

TPI - stands for threads per inch and refers to the thread count of the tyre casings. A high thread count usually means more supple and lighter tyres, this can be anything as high as 320 tpi. We can’t always provide this information however, as it’s not always possible to know for sure.

View full product details

Panaracer Pasela TourGuard Black/Skin NOS/NIB Classic 700 x 37c Touring Folding Tyres

£56.25 £75.00

✓ Original pair of tyres - produced in the 2000s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping

Panaracer Pasela folding tyres, hailing from Japan and in production during the 2000s. Made from rubber/kevlar and weighing in at 1040 grams (the weight and price displayed are for a pair of tyres). A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.

NB: If mounted in the photos this is for illustrative purpose only, any wheels or rims shown are not included.

OVERVIEW

Condition - New Old Stock - In Original Packaging*
Production Era - 2000s
Country - Japanese
Material - Rubber / Kevlar
Weight - 1040 g
Stock Code - D-TYP-F6C

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 700 x 37c
Bike Type - Touring
ISO Diameter - 622 mm (700c/28")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Size - this is the manufacturer’s sizing and must match the size or your wheels. This can be confusing as tyres have had different sizing systems over the years, and there are many (sometimes conflicting) sizes available. For this reason it’s important to check the ISO diameter too for clarification, especially for 26” wheels.

Bike Type - the type of bike the tyres were designed to be used on. Road tyres will generally be narrow with minimal tread, touring tyres wider with a bit more grip in the tread, and cyclocross & MTB tyres wider still (especially the latter), with a much more pronounced tread pattern.

ISO Diameter - this relates to the diameter of the wheel rims at the point where the tyres are seated (bead seat diameter). This is a universal measurement, often displayed on tyres as 28-622 or similar, 28 referring to the tyre width and 622 being the ISO diameter in millimetres.

TPI - stands for threads per inch and refers to the thread count of the tyre casings. A high thread count usually means more supple and lighter tyres, this can be anything as high as 320 tpi. We can’t always provide this information however, as it’s not always possible to know for sure.

View full product details

Panaracer Smoke Classic Compe Kevlar Black NOS/NIB Classic 26 x 2.1" MTB Folding Tyre

£41.25 £55.00

✓ Original tyre - produced in the 1990s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping

Panaracer Smoke folding tyre, hailing from Japan and in production during the 1990s (yet still new & unused after all this time!). Made from rubber/kevlar and weighing in at 611 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

NB: If mounted in the photos this is for illustrative purpose only, any wheels or rims shown are not included.

OVERVIEW

Condition - New Old Stock - In Original Packaging*
Production Era - 1990s
Country - Japanese
Material - Rubber / Kevlar
Weight - 611 g
Stock Code - D-TY-F10C

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 26 x 2.1"
Bike Type - MTB
ISO Diameter - 559 mm (26")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Size - this is the manufacturer’s sizing and must match the size or your wheel. This can be confusing as tyres have had different sizing systems over the years, and there are many (sometimes conflicting) sizes available. For this reason it’s important to check the ISO diameter too for clarification, especially for 26” wheels.

Bike Type - the type of bike the tyre was designed to be used on. Road tyres will generally be narrow with minimal tread, touring tyres wider with a bit more grip in the tread, and cyclocross & MTB tyres wider still (especially the latter), with a much more pronounced tread pattern.

ISO Diameter - this relates to the diameter of the wheel rim at the point where the tyre is seated (bead seat diameter). This is a universal measurement, often displayed on tyres as 28-622 or similar, 28 referring to the tyre width and 622 being the ISO diameter in millimetres.

TPI - stands for threads per inch and refers to the thread count of the tyre casing. A high thread count usually means a more supple and lighter tyre, this can be anything as high as 320 tpi. We can’t always provide this information however, as it’s not always possible to know for sure.

View full product details

Panaracer Smoke Dart S.C NOS Classic 26 x 2.2" MTB Tyre

£33.75 £45.00

✓ Original part - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Panaracer Smoke Dart S.C tyre, hailing from Japan and in production during the 1990s (yet still new & unused after all this time!). Made from rubber and weighing in at 745 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

Condition - New Old Stock*
Production Era - 1990s
Country - Japanese
Material - Rubber
Weight - 745 g
Stock Code - D-TY-R2C

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 26 x 2.2"
Bike Type - MTB
ISO Diameter - 559 mm (26")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Panaracer Smoke NOS Classic 26 x 2.1" MTB Tyre

£30.00 £40.00

✓ Original part - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Panaracer Smoke tyre, hailing from Japan and in production during the 1990s (yet still new & unused after all this time!). Made from rubber and weighing in at 735 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

Condition - New Old Stock*
Production Era - 1990s
Country - Japanese
Material - Rubber
Weight - 735 g
Stock Code - D-TY-R1C

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 26 x 2.1"
Bike Type - MTB
ISO Diameter - 559 mm (26")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Panasonic Tour de Suisse 1991 Classic Black Drawstring Cycling Kit Bag

£31.50 £35.00

✓ Original kit bag - produced in the 1990s
✓ Checked over & photographed in detail
✓ Worldwide shipping

Panasonic Tour de Suisse 1991 kit bag (or gym sack if you prefer), hailing from Japan and in production during the 1990s. An excellent choice for classic cycling enthusiasts, but great for cyclists of the non-classic variety too!

The bag's been checked over and graded as good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.

OVERVIEW

Condition - Good
Production Era - 1990s
Country - Japanese
Material - Polyester
Weight - 37 g
Stock Code - U-BAG-G1C

TECHNICAL INFO

Colour* - Black
Enclosure - Drawstring
Dimensions (L x W) - 39 x 25 cm

▼SHIPPING, TAXES & RETURNS: We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

View full product details

Parentini Vintage Short Sleeve Cycling Jersey

£18.00 £30.00

Measurements are taken when laid flat and the length is measured down the back from the bottom of the collar to the bottom of the hem.

NB: We've given a 'snug but comfortable' estimated size as a guide only. Due to the nature of vintage items, it's always best to refer to the actual measurements given, and if possible compare them to another jersey that fits well.

SIZING& CONDITION:

Estimated Size:	Small
Pit to Pit:	19" / 49cm
Length:	26.5" / 67.3cm
Material:	100% Polyester
Condition:	Good (Few Nicks)

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, normally within 2-3 days, but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Parentini Vintage Short Sleeved Cycling Jersey

£16.80 £28.00

Pre-washed vintage cycling jersey from days gone by.

All jerseys are sized to be a snug but not super-tight fit. We've also provided actual measurements of the garment when laid flat so you can compare against your favourite fitting jersey. Please make sure the length is long enough, as these are sized using the chest measurement, and sometimes mis-shaping can happen over the years.

The chest is measured across the front, from armpit to armpit at the seam. The length is measured down the back, from top of collar to bottom of hem.

Size:	Medium (38 - 42" Chest)
Material:	Feels Like Polyester
Condition:	Good
SKU:	J318

	Cm	Inches
Pit to Pit (Laid Flat):	48	19
Length (Down Back):	76	30

*Our model wears a size medium and is 182cm / 6" tall.

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, normally within 2-3 days, but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Pariba Formula NOS Vintage 700 x 20c Road Tyre

£56.25 £75.00

✓ Original part - produced in the 1970s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Pariba Formula tyre, hailing from The Netherlands and in production during the 1970s (yet still new & unused after all this time!). Made from rubber and weighing in at 255 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong tyre!

OVERVIEW

Condition - New Old Stock*
Production Era - 1970s
Country - Dutch
Material - Rubber
Weight - 255 g
Stock Code - D-TY-R14V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 700 x 20c
Bike Type - Road
ISO Diameter - 622 mm (700c/28")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Pariba High Pressure NOS Vintage 700 x 20c Road Tyre

£41.25 £55.00

✓ Original part - produced in the 1970s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Pariba High Pressure tyre, hailing from The Netherlands and in production during the 1970s (yet still new & unused after all this time!). Made from rubber and weighing in at 280 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong tyre!

OVERVIEW

Condition - New Old Stock*
Condition Notes - Sidewalls a little dry
Production Era - 1970s
Country - Dutch
Material - Rubber
Weight - 280 g
Stock Code - D-TY-R13V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 700 x 20c
Bike Type - Road
ISO Diameter - 622 mm (700c/28")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Pariba HP Hand Made Black/Skin NOS Vintage 700 x 23c Tyres

£86.25 £115.00

✓ Original pair of tyres - produced in the 1970s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Pariba HP tyres, hailing from The Netherlands and in production during the 1970s (yet still new & unused after all this time!). Made from rubber and weighing in at 610 grams (the weight and price displayed are for a pair of tyres). A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong tyres!

NB: If mounted in the photos this is for illustrative purpose only, any wheels or rims shown are not included.

OVERVIEW

Condition - New Old Stock*
Condition Notes - Sidewalls a little dry
Production Era - 1970s
Country - Dutch
Material - Rubber
Weight - 610 g
Stock Code - D-TYP-R45V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Size - 700 x 23c
Bike Type - Road
ISO Diameter - 622 mm (700c/28")

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Size - this is the manufacturer’s sizing and must match the size or your wheels. This can be confusing as tyres have had different sizing systems over the years, and there are many (sometimes conflicting) sizes available. For this reason it’s important to check the ISO diameter too for clarification, especially for 26” wheels.

Bike Type - the type of bike the tyres were designed to be used on. Road tyres will generally be narrow with minimal tread, touring tyres wider with a bit more grip in the tread, and cyclocross & MTB tyres wider still (especially the latter), with a much more pronounced tread pattern.

ISO Diameter - this relates to the diameter of the wheel rims at the point where the tyres are seated (bead seat diameter). This is a universal measurement, often displayed on tyres as 28-622 or similar, 28 referring to the tyre width and 622 being the ISO diameter in millimetres.

TPI - stands for threads per inch and refers to the thread count of the tyre casings. A high thread count usually means more supple and lighter tyres, this can be anything as high as 320 tpi. We can’t always provide this information however, as it’s not always possible to know for sure.

View full product details

Patterned Black & Red Large Vintage Cycling Jersey

£30.00 £40.00

✓ Original vintage jersey - 1980s/90s style!
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & honestly graded
✓ Great alternative to buying new
✓ Worldwide shipping

Patterned black & red short sleeved cycling jersey, likely made in the 1980s/1990s given the style. An excellent choice for wearing on your vintage bike, and also a responsible alternative to buying brand new cycling kit!

If you're taking part in L'Eroica or a similar vintage event, this is compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong jersey!

The jersey’s been thoroughly checked over and graded as very good condition. If there are any issues worth noting we’ll do so in the overview section below, but please take a good look at the photos so you can see the condition yourself before you buy.

OVERVIEW

Size Estimate (Chest)** - Large (43-46" Chest)
Condition - Very Good
Material - Polyester
Stock Code - U-JS119V

**This is just an estimate so please check the actual measurements before buying, the best way to get the right fit is to compare them with those of a garment that fits well, and please use all the measurements provided as some vintage jerseys can have irregular sizing.

DETAIL & SIZING

Sleeve Type - Short Sleeved
Pit to Pit (Laid Flat) - 56 cm
Top to Bottom (Front) - 69 cm
Top to Bottom (Back) - 83 cm
Shoulder Seam to Sleeve End (Oustide) - 27 cm
Across Neck (Laid Flat) - 22.5 cm
Across Sleeve End (Laid Flat) - 19 cm

NB: Check the help section to see how we take these measurements to get a good comparison.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

We've also provided photographs below to illustrate how we take our measurements.

Pit to Pit - this measurement is taken from the centre of one armpit to the other, across the chest with the jersey laid flat.

Top to Bottom - this will always be from the very top of the collar to the very bottom hem, we provide measurements for both the front and back, always taken with the jersey laid flat.

Shoulder Seam to Sleeve End - this measurement is taken from the shoulder seam down to the very end of the sleeve on the outside.

Across Neck - for consistency on all neck shapes we gather the front and back together and lay them flat, then measure across the stitching (as shown in the supporting photos).

Across Sleeve End - measured across the sleeve end, laid flat.

View full product details

Patterned Black & Red Large Vintage Cycling Jersey

£22.50 £30.00

✓ Original vintage jersey - 1980s/90s style!
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & honestly graded
✓ Great alternative to buying new
✓ Worldwide shipping

Patterned black & red short sleeved cycling jersey, likely made in the 1980s/1990s given the style. An excellent choice for wearing on your vintage bike, and also a responsible alternative to buying brand new cycling kit!

If you're taking part in L'Eroica or a similar vintage event, this is compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong jersey!

The jersey’s been thoroughly checked over and graded as good condition. If there are any issues worth noting we’ll do so in the overview section below, but please take a good look at the photos so you can see the condition yourself before you buy.

OVERVIEW

Size Estimate (Chest)** - Large (43-46" Chest)
Condition - Good
Condition Notes - Some pulled threads
Material - Synthetic
Stock Code - U-JS131V

**This is just an estimate so please check the actual measurements before buying, the best way to get the right fit is to compare them with those of a garment that fits well, and please use all the measurements provided as some vintage jerseys can have irregular sizing.

DETAIL & SIZING

Sleeve Type - Short Sleeved
Pit to Pit (Laid Flat) - 58 cm
Top to Bottom (Front) - 65 cm
Top to Bottom (Back) - 80 cm
Shoulder Seam to Sleeve End (Oustide) - 25 cm
Across Neck (Laid Flat) - 22.5 cm
Across Sleeve End (Laid Flat) - 19 cm

NB: Check the help section to see how we take these measurements to get a good comparison.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

We've also provided photographs below to illustrate how we take our measurements.

Pit to Pit - this measurement is taken from the centre of one armpit to the other, across the chest with the jersey laid flat.

Top to Bottom - this will always be from the very top of the collar to the very bottom hem, we provide measurements for both the front and back, always taken with the jersey laid flat.

Shoulder Seam to Sleeve End - this measurement is taken from the shoulder seam down to the very end of the sleeve on the outside.

Across Neck - for consistency on all neck shapes we gather the front and back together and lay them flat, then measure across the stitching (as shown in the supporting photos).

Across Sleeve End - measured across the sleeve end, laid flat.

View full product details

Paturaud Grand Luxe (No. 16) NOS Size M/L Vintage Steel Toe Clips / Cages

£56.25 £75.00

✓ Original toe clips - produced in the 1970s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Paturaud Grand Luxe toe clips, hailing from France and in production during the 1970s (yet still new & unused after all this time!). Made from steel and weighing in at 87 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong toe clips!

OVERVIEW

Size Guide** - M/L (EU 42/43)
Condition - New Old Stock*
Model ID - No. 16
Production Era - 1970s
Material - Steel
Weight - 87 g
Stock Code - D-TC51V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

**This is a guide based on traditional toe clip sizing for cycling shoes of the time, if you ride with chunkier shoes then we'd recommend going for a larger size. Please use this as a guide only and if possible use the length measurement provided to compare with toe clips you know fit well.

TECHNICAL INFO

Pedal Fixing - Standard (Quill / Platform)
Toe Strap Type - Single Strap
Length (Fixing End to Toe End)* - 6 cm
Distance Between Fixing Bolts (ctc) - 25 mm

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Pedal Fixing - 'standard' toe clips fix to the front of the pedals, most will be of this type and work with both quill & platform pedals providing they have mounting holes in the correct place. There are also 'aero' ones that attach to the top, and side fixing versions too. 'Wide platform' fixings are similar to standard ones but the fixing holes are almost 3 inches apart.

Toe Strap Type - most toe clips are designed to accept a single toe strap, but there are some less common ones that allow two toe straps to be fitted.

Length - this is measured from the fixing end to the toe end at the most extreme points, the same way the manufacturers measure and we use this to recommend the fit if there's no size stamped on them. All length measurements are rounded to the nearest 0.5 cm.

Distance Between Fixing Bolts - we measure this distance from the centre of one hole to the next (ctc), this usually only needs to be close, not exact, providing the holes on the toe clips are oblong shaped to allow a decent amount of wiggle room (most toe clips are made this way).

View full product details

Paturaud Grand Luxe (No. 16) NOS Size M/L Vintage Steel Toe Clips / Cages

£56.25 £75.00

✓ Original toe clips - produced in the 1970s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Paturaud Grand Luxe toe clips, hailing from France and in production during the 1970s (yet still new & unused after all this time!). Made from steel and weighing in at 66 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong toe clips!

OVERVIEW

Size Guide** - M/L (EU 42/43)
Condition - New Old Stock*
Model ID - No. 16
Production Era - 1970s
Material - Steel
Weight - 66 g
Stock Code - D-TC52V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

**This is a guide based on traditional toe clip sizing for cycling shoes of the time, if you ride with chunkier shoes then we'd recommend going for a larger size. Please use this as a guide only and if possible use the length measurement provided to compare with toe clips you know fit well.

TECHNICAL INFO

Pedal Fixing - Standard (Quill / Platform)
Toe Strap Type - Single Strap
Length (Fixing End to Toe End)* - 6 cm
Distance Between Fixing Bolts (ctc) - 25 mm

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Pedal Fixing - 'standard' toe clips fix to the front of the pedals, most will be of this type and work with both quill & platform pedals providing they have mounting holes in the correct place. There are also 'aero' ones that attach to the top, and side fixing versions too. 'Wide platform' fixings are similar to standard ones but the fixing holes are almost 3 inches apart.

Toe Strap Type - most toe clips are designed to accept a single toe strap, but there are some less common ones that allow two toe straps to be fitted.

Length - this is measured from the fixing end to the toe end at the most extreme points, the same way the manufacturers measure and we use this to recommend the fit if there's no size stamped on them. All length measurements are rounded to the nearest 0.5 cm.

Distance Between Fixing Bolts - we measure this distance from the centre of one hole to the next (ctc), this usually only needs to be close, not exact, providing the holes on the toe clips are oblong shaped to allow a decent amount of wiggle room (most toe clips are made this way).

View full product details

Paturaud Grand Luxe (No. 16) Size L Vintage Steel Toe Clips

£36.00 £40.00

✓ Original toe clips - produced in the 1970s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Paturaud Grand Luxe toe clips (or pedal cages if you prefer), hailing from France and in production during the 1970s. Made from steel and weighing in at 66 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or any other vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong toe clips!

The toe clips have been checked, cleaned and graded as good condition, but do take a good look at the detailed photos so you can see the shape & condition before you buy.

OVERVIEW

Size Guide** - L (EU 43/44)
Condition - Good
Model ID - No. 16
Production Era - 1970s
Material - Steel
Weight - 66 g
Stock Code - U-TC93V

**This is a guide based on traditional toe clip sizing for cycling shoes of the time, if you ride with chunkier shoes then we'd recommend going for a larger size. Please use this as a guide only and if possible use the length measurement provided to compare with toe clips you know fit well.

TECHNICAL INFO

Pedal Fixing - Standard (Quill / Platform)
Toe Strap Fit - Single Strap
Length (Fixing End to Toe End)* - 6.5 cm
Distance Between Fixing Bolts (ctc) - 25 mm

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Pedal Fixing - 'standard' toe clips fix to the front of the pedals, most will be of this type and work with both quill & platform pedals providing they have mounting holes in the correct place. There are also 'aero' ones that attach to the top, and side fixing versions too. 'Wide platform' fixings are similar to standard ones but the fixing holes are almost 3 inches apart.

Toe Strap Fit - most toe clips are designed to accept a single toe strap, but there are some less common ones that allow two toe straps to be fitted.

Length - this is measured from the fixing end to the toe end at the most extreme points, the same way the manufacturers measure and we use this to recommend the fit if there's no size stamped on them. All length measurements are rounded to the nearest 0.5 cm.

Distance Between Fixing Bolts - we measure this distance from the centre of one hole to the next (ctc), this usually only needs to be close, not exact, providing the holes on the toe clips are oblong shaped to allow a decent amount of wiggle room (most toe clips are made this way).

View full product details

Paturaud Special NOS Size M/L Vintage Steel Toe Clips / Cages

£56.25 £75.00

✓ Original toe clips - produced in the 1970s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Paturaud Special toe clips, hailing from France and in production during the 1970s (yet still new & unused after all this time!). Made from steel and weighing in at 64 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong toe clips!

OVERVIEW

Size Guide** - M/L (EU 42/43)
Condition - New Old Stock*
Production Era - 1970s
Material - Steel
Weight - 64 g
Stock Code - D-TC50V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

**This is a guide based on traditional toe clip sizing for cycling shoes of the time, if you ride with chunkier shoes then we'd recommend going for a larger size. Please use this as a guide only and if possible use the length measurement provided to compare with toe clips you know fit well.

TECHNICAL INFO

Pedal Fixing - Standard (Quill / Platform)
Toe Strap Type - Single Strap
Length (Fixing End to Toe End)* - 6 cm
Distance Between Fixing Bolts (ctc) - 25 mm

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Pedal Fixing - 'standard' toe clips fix to the front of the pedals, most will be of this type and work with both quill & platform pedals providing they have mounting holes in the correct place. There are also 'aero' ones that attach to the top, and side fixing versions too. 'Wide platform' fixings are similar to standard ones but the fixing holes are almost 3 inches apart.

Toe Strap Type - most toe clips are designed to accept a single toe strap, but there are some less common ones that allow two toe straps to be fitted.

Length - this is measured from the fixing end to the toe end at the most extreme points, the same way the manufacturers measure and we use this to recommend the fit if there's no size stamped on them. All length measurements are rounded to the nearest 0.5 cm.

Distance Between Fixing Bolts - we measure this distance from the centre of one hole to the next (ctc), this usually only needs to be close, not exact, providing the holes on the toe clips are oblong shaped to allow a decent amount of wiggle room (most toe clips are made this way).

View full product details

Paturaud Special Size M Vintage Steel Toe Clips / Cages

£37.50 £50.00

✓ Original toe clips - produced in the 1970s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Paturaud Special toe clips, hailing from France and in production during the 1970s. Made from steel and weighing in at 65 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong toe clips!

The toe clips have been cleaned, checked by one of our mechanics and graded as excellent condition, but do take a good look at the detailed photos so you can see the shape & condition before you buy.

OVERVIEW

Size Guide** - M (Up to EU 42)
Condition - Excellent
Production Era - 1970s
Material - Steel
Weight - 65 g
Stock Code - U-TC1V

**This is a guide based on traditional toe clip sizing for cycling shoes of the time, if you ride with chunkier shoes then we'd recommend going for a larger size. Please use this as a guide only and if possible use the length measurement provided to compare with toe clips you know fit well.

TECHNICAL INFO

Pedal Fixing - Standard (Quill / Platform)
Toe Strap Type - Single Strap
Length (Fixing End to Toe End)* - 5.5 cm
Distance Between Fixing Bolts (ctc) - 25 mm

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Pedal Fixing - 'standard' toe clips fix to the front of the pedals, most will be of this type and work with both quill & platform pedals providing they have mounting holes in the correct place. There are also 'aero' ones that attach to the top, and side fixing versions too. 'Wide platform' fixings are similar to standard ones but the fixing holes are almost 3 inches apart.

Toe Strap Type - most toe clips are designed to accept a single toe strap, but there are some less common ones that allow two toe straps to be fitted.

Length - this is measured from the fixing end to the toe end at the most extreme points, the same way the manufacturers measure and we use this to recommend the fit if there's no size stamped on them. All length measurements are rounded to the nearest 0.5 cm.

Distance Between Fixing Bolts - we measure this distance from the centre of one hole to the next (ctc), this usually only needs to be close, not exact, providing the holes on the toe clips are oblong shaped to allow a decent amount of wiggle room (most toe clips are made this way).

View full product details

Pelissier / Unbranded Vintage 700c Clincher Road Rear Wheel

£63.75 £85.00

✓ Original vintage wheel - produced in the 1980s
✓ Lightweight for the era - just 962 grams
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & serviced
✓ Worldwide shipping

Pelissier / Unbranded rear wheel, the hub hailing from France and in production during the 1980s. Made from aluminium/steel and weighing in at 962 grams - pretty lightweight for a rear wheel at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong wheel!

The wheel's been serviced, checked by one of our mechanics and graded as OK condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.

OVERVIEW

Bearing / Race Condition - OK
Rim Condition - Good
Production Era - 1980s
Country - French
Material - Aluminium/Steel
Weight - 962 g
Stock Code - U-W-SR27V

TECHNICAL INFO

Rim Size - 700c Clincher
Bike Type - Road
Drilling - 36 Hole
Spacing (O.L.D.) - 126 mm
Speed - 5 Speed, 6 Speed, 7 Speed
Sprocket Fitting - Screw On (English/ISO: 1.375 x 24 TPI)

▼SHIPPING, TAXES & RETURNS: We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

View full product details

Pelissier 2000 / Wolber Super Champion Alpine Vintage Clincher Front Wheel

£45.00 £90.00

All our wheels come professionally serviced, including tension check, truing & hub servicing where required. Please refer to the detailed photographs & information below for sizing & condition.

NB: Full size tubulars only come in one size. They are often referred to as 28", but some people call them 27" or 700c.

SIZING & CONDITION:

Hub:	Pelissier 2000 Sealed Bearings
Rim:	Wolber Super Champion Alpine
Wheel Size:	700c
Hole Count:	36
Spacing:	100mm
Bearing Condition:	Very Good
Rim Wear:	Light

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, normally within 2-3 days, but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Peugeot Yellow & Blue Large Classic Cycling Jersey

£30.00 £40.00

✓ Original classic jersey - 1990s style!
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & honestly graded
✓ Great alternative to buying new
✓ Worldwide shipping

Peugeot short sleeved cycling jersey, hailing from France and likely made in the 1990s given the style. An excellent choice for wearing on your vintage bike, and also a responsible alternative to buying brand new cycling kit!

If you're taking part in L'Eroica or a similar vintage event, this is compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong jersey!

The jersey’s been thoroughly checked over and graded as good condition. If there are any issues worth noting we’ll do so in the overview section below, but please take a good look at the photos so you can see the condition yourself before you buy.

OVERVIEW

Size Estimate (Chest)** - Large (43-46" Chest)
Condition - Good
Condition Notes - Some damage to the pocket
Material - Polyester
Stock Code - U-JS105C

**This is just an estimate so please check the actual measurements before buying, the best way to get the right fit is to compare them with those of a garment that fits well, and please use all the measurements provided as some classic jerseys can have irregular sizing.

DETAIL & SIZING

Sleeve Type - Short Sleeved
Pit to Pit (Laid Flat) - 54 cm
Top to Bottom (Front) - 62 cm
Top to Bottom (Back) - 74 cm
Shoulder Seam to Sleeve End (Oustide) - 18 cm
Across Neck (Laid Flat) - 22.5 cm
Across Sleeve End (Laid Flat) - 14 cm

NB: Check the help section to see how we take these measurements to get a good comparison.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

We've also provided photographs below to illustrate how we take our measurements.

Pit to Pit - this measurement is taken from the centre of one armpit to the other, across the chest with the jersey laid flat.

Top to Bottom - this will always be from the very top of the collar to the very bottom hem, we provide measurements for both the front and back, always taken with the jersey laid flat.

Shoulder Seam to Sleeve End - this measurement is taken from the shoulder seam down to the very end of the sleeve on the outside.

Across Neck - for consistency on all neck shapes we gather the front and back together and lay them flat, then measure across the stitching (as shown in the supporting photos).

Across Sleeve End - measured across the sleeve end, laid flat.

View full product details

Pewilux Vintage Cotton Cycling Cap

£18.00 £20.00

✓ Original vintage cap - 1970s style!
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & honestly graded
✓ Great alternative to buying new
✓ Worldwide shipping

Vintage Pewilux cycling cap, likely made in the 1970s given the style. An excellent choice for wearing on your vintage bike (or any occasion you fancy of course), and also a great alternative to buying brand new cycling kit!

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cap!

The cap's been thoroughly checked over and graded as excellent condition. If there are any issues worth noting we’ll do so in the overview section below, but please take a good look at the photos so you can see the condition yourself before you buy.

OVERVIEW

Cap Size** - One Size (Standard Fit)
Condition - Excellent
Production Era - 1970s
Stock Code - U-CAP28V

**Most cycling caps come in ‘one size’ as standard and will fit most head sizes. Some can be on the small side however, so we list these as a ‘smaller fit’ and wouldn’t recommend them for a head circumference above 58 cm.

DETAIL

Cap Type - Summer/Under Helmet
Construction - 4 Panel
Colour* - Yellow / Green

*The colour description is just a guide, please check the photos to get a good idea of the colour too, as we make sure these are as close to the true colour as possible.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Cap Type - we refer to the classic cycling cap type as summer/under helmet, although they can of course be used all year round. When worn under a helmet they provide comfort, sun protection and are sweat-wicking too. Winter hats will usually cover the ears and are referred to as 'Belgian' caps. Baseball caps were often worn by support teams or sold as branded merchandise.

Construction - the number of panels the cap body is made up of, not including the peak.

View full product details

Philippe (ATAX) Franco America (D358) NOS Vintage 38 cm Drop Handlebars

£48.75 £65.00

✓ Original bars - produced in the 1980s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Philippe (ATAX) Franco America drop handlebars, hailing from France and in production during the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 450 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

OVERVIEW

Condition - New Old Stock*
Model ID - D358
Production Era - 1980s
Country - French
Material - Aluminium
Weight - 450 g
Stock Code - D-HB177V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 38 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop (ctc) - 156 mm
Reach (ctc) - 106 mm
Cable Groove - Single

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Width (ctc)* - measured at the ends of the drops, from the centre of one side to the other (ctc), to the nearest cm. In some cases the bars may display a different width as some brands measure outside to outside rather than ctc, but we always use this measurement for consistency.

Shape - Classic' drops have a smooth curve, 'anatomic' have multiple angles for different hand positions, 'compact' are short reach with a shallow drop and randonneur bars are usually classic in shape but rise up then flare out at the drops.

Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.

Drop (ctc) - from the top flat section to the bottom of the drops, measured from the centre of one to the other with the flat part at the end of the drops parrallel to the ground.

Reach (ctc) - measured from the centre of the top section to the centre of the 'curve' at its furthest point, giving you the maximum reach. We measure this with the flat part at the end of of the drops parrallel to the ground.

Cable Groove - these allow you to run your cables neatly underneath the handlebar tape, if your setup requires this.

View full product details

Philippe (ATAX) Franco America (D358) NOS Vintage 40 cm Drop Handlebars

£48.75 £65.00

✓ Original bars - produced in the 1980s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Philippe (ATAX) Franco America drop handlebars, hailing from France and in production during the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 350 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

OVERVIEW

Condition - New Old Stock*
Model ID - D358
Production Era - 1980s
Country - French
Material - Aluminium
Weight - 350 g
Stock Code - D-HB175V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 40 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop (ctc) - 154 mm
Reach (ctc) - 104 mm
Cable Groove - Single

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Width (ctc)* - measured at the ends of the drops, from the centre of one side to the other (ctc), to the nearest cm. In some cases the bars may display a different width as some brands measure outside to outside rather than ctc, but we always use this measurement for consistency.

Shape - Classic' drops have a smooth curve, 'anatomic' have multiple angles for different hand positions, 'compact' are short reach with a shallow drop and randonneur bars are usually classic in shape but rise up then flare out at the drops.

Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.

Drop (ctc) - from the top flat section to the bottom of the drops, measured from the centre of one to the other with the flat part at the end of the drops parrallel to the ground.

Reach (ctc) - measured from the centre of the top section to the centre of the 'curve' at its furthest point, giving you the maximum reach. We measure this with the flat part at the end of of the drops parrallel to the ground.

Cable Groove - these allow you to run your cables neatly underneath the handlebar tape, if your setup requires this.

View full product details

Philippe (ATAX) Franco Italia (D352) NOS Vintage 38 cm Drop Handlebars

£33.75 £45.00

✓ Original bars - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Philippe (ATAX) Franco Italia drop handlebars, hailing from France and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 380 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!

OVERVIEW

Condition - New Old Stock*
Condition Notes - One end of the drops sits a around 5 mm higher than the other (can be seen in the photos) but these are new & unused
Model ID - D352
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 380 g
Stock Code - D-HB173V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 38 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop (ctc) - 145 mm
Reach (ctc) - 87 mm
Cable Groove - None

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Width (ctc)* - measured at the ends of the drops, from the centre of one side to the other (ctc), to the nearest cm. In some cases the bars may display a different width as some brands measure outside to outside rather than ctc, but we always use this measurement for consistency.

Shape - Classic' drops have a smooth curve, 'anatomic' have multiple angles for different hand positions, 'compact' are short reach with a shallow drop and randonneur bars are usually classic in shape but rise up then flare out at the drops.

Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.

Drop (ctc) - from the top flat section to the bottom of the drops, measured from the centre of one to the other with the flat part at the end of the drops parrallel to the ground.

Reach (ctc) - measured from the centre of the top section to the centre of the 'curve' at its furthest point, giving you the maximum reach. We measure this with the flat part at the end of of the drops parrallel to the ground.

Cable Groove - these allow you to run your cables neatly underneath the handlebar tape, if your setup requires this.

View full product details

Philippe (ATAX) Franco Italia (D352) NOS Vintage 40 cm Drop Handlebars

£41.25 £55.00

✓ Original bars - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Philippe (ATAX) Franco Italia drop handlebars, hailing from France and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 385 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!

OVERVIEW

Condition - New Old Stock*
Model ID - D352
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 385 g
Stock Code - D-HB170V
NB - Logos appear to be upside down

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 40 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop (ctc) - 150 mm
Reach (ctc) - 90 mm
Cable Groove - None

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Width (ctc)* - measured at the ends of the drops, from the centre of one side to the other (ctc), to the nearest cm. In some cases the bars may display a different width as some brands measure outside to outside rather than ctc, but we always use this measurement for consistency.

Shape - Classic' drops have a smooth curve, 'anatomic' have multiple angles for different hand positions, 'compact' are short reach with a shallow drop and randonneur bars are usually classic in shape but rise up then flare out at the drops.

Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.

Drop (ctc) - from the top flat section to the bottom of the drops, measured from the centre of one to the other with the flat part at the end of the drops parrallel to the ground.

Reach (ctc) - measured from the centre of the top section to the centre of the 'curve' at its furthest point, giving you the maximum reach. We measure this with the flat part at the end of of the drops parrallel to the ground.

Cable Groove - these allow you to run your cables neatly underneath the handlebar tape, if your setup requires this.

View full product details

Philippe (ATAX) Franco Italia (D352) Vintage 40 cm Drop Handlebars

£34.00 £40.00

✓ Original bars - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked, cleaned & tape residue removed
✓ Worldwide shipping

Philippe (ATAX) Franco Italia drop handlebars, hailing from France and in production from the 1970s to the 1980s. Made from aluminium and weighing in at 380 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!

The bars have been checked, handlebar tape residue removed and graded as very good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.

OVERVIEW

Condition - Very Good
Model ID - D352
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 380 g
Stock Code - U-HB147V

TECHNICAL INFO

Width (ctc) - 40 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop (ctc) - 144 mm
Reach (ctc) - 82 mm
Cable Groove - None

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Width (ctc)* - measured at the ends of the drops, from the centre of one side to the other (ctc), to the nearest cm. In some cases the bars may display a different width as some brands measure outside to outside rather than ctc, but we always use this measurement for consistency.

Shape - Classic' drops have a smooth curve, 'anatomic' have multiple angles for different hand positions, 'compact' are short reach with a shallow drop and randonneur bars are usually classic in shape but flare out at the drops.

Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.

Drop (ctc) - from the top flat section to the bottom of the drops, measured from the centre of one to the other with the flat part at the end of the drops parrallel to the ground.

Reach (ctc) - measured from the centre of the top section to the centre of the 'curve' at its furthest point, giving you the maximum reach. We measure this with the flat part at the end of of the drops parrallel to the ground.

Cable Groove - these allow you to run your cables neatly underneath the handlebar tape, if your setup requires this.

View full product details

Philippe (ATAX) Professionnel NOS Vintage 40 cm Drop Handlebars

£41.25 £55.00

✓ Original bars - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Philippe (ATAX) Professionnel drop handlebars, hailing from France and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 295 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!

OVERVIEW

Condition - New Old Stock*
Condition Notes - Small ding at clamp area right in the centre, as seen in photos.
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 295 g
Stock Code - D-HB171V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 40 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop (ctc) - 137 mm
Reach (ctc) - 107 mm
Cable Groove - None

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Width (ctc)* - measured at the ends of the drops, from the centre of one side to the other (ctc), to the nearest cm. In some cases the bars may display a different width as some brands measure outside to outside rather than ctc, but we always use this measurement for consistency.

Shape - Classic' drops have a smooth curve, 'anatomic' have multiple angles for different hand positions, 'compact' are short reach with a shallow drop and randonneur bars are usually classic in shape but rise up then flare out at the drops.

Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.

Drop (ctc) - from the top flat section to the bottom of the drops, measured from the centre of one to the other with the flat part at the end of the drops parrallel to the ground.

Reach (ctc) - measured from the centre of the top section to the centre of the 'curve' at its furthest point, giving you the maximum reach. We measure this with the flat part at the end of of the drops parrallel to the ground.

Cable Groove - these allow you to run your cables neatly underneath the handlebar tape, if your setup requires this.

View full product details

Philippe (ATAX) Professionnel NOS Vintage 40 cm Drop Handlebars

£41.25 £55.00

✓ Original bars - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Philippe (ATAX) Professionnel drop handlebars, hailing from France and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 295 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!

OVERVIEW

Condition - New Old Stock*
Condition Notes - These have quite a few marks as seen in the photos but are new & unused
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 295 g
Stock Code - D-HB172V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 40 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop (ctc) - 137 mm
Reach (ctc) - 107 mm
Cable Groove - None

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Width (ctc)* - measured at the ends of the drops, from the centre of one side to the other (ctc), to the nearest cm. In some cases the bars may display a different width as some brands measure outside to outside rather than ctc, but we always use this measurement for consistency.

Shape - Classic' drops have a smooth curve, 'anatomic' have multiple angles for different hand positions, 'compact' are short reach with a shallow drop and randonneur bars are usually classic in shape but rise up then flare out at the drops.

Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.

Drop (ctc) - from the top flat section to the bottom of the drops, measured from the centre of one to the other with the flat part at the end of the drops parrallel to the ground.

Reach (ctc) - measured from the centre of the top section to the centre of the 'curve' at its furthest point, giving you the maximum reach. We measure this with the flat part at the end of of the drops parrallel to the ground.

Cable Groove - these allow you to run your cables neatly underneath the handlebar tape, if your setup requires this.

View full product details

Philippe ATAX Franco Belge (D354) NOS Vintage 37 cm Drop Handlebars

£41.25 £55.00

✓ Original part - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Philippe ATAX Franco Belge drop handlebars, hailing from France and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 350 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!

OVERVIEW

Condition - New Old Stock*
Model ID - D354
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 350 g
Stock Code - D-HB23V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 37 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop - 141 mm
Reach - 78 mm
Cable Groove - None

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Philippe ATAX Franco Belge (D354) NOS Vintage 39 cm Drop Handlebars

£41.25 £55.00

✓ Original part - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Philippe ATAX Franco Belge drop handlebars, hailing from France and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 350 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!

OVERVIEW

Condition - New Old Stock*
Model ID - D354
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 350 g
Stock Code - D-HB22V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 39 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop - 141 mm
Reach - 78 mm
Cable Groove - None

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Philippe ATAX Franco Italia (D352) NOS Vintage 38 cm Drop Handlebars

£41.25 £55.00

✓ Original part - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Philippe ATAX Franco Italia drop handlebars, hailing from France and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 380 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!

OVERVIEW

Condition - New Old Stock*
Model ID - D352
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 380 g
Stock Code - D-HB20V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 38 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop - 141 mm
Reach - 79 mm
Cable Groove - None

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Philippe ATAX Franco Italia (D352) NOS Vintage 40 cm Drop Handlebars

£41.25 £55.00

✓ Original part - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Philippe ATAX Franco Italia drop handlebars, hailing from France and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Made from aluminium and weighing in at 380 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bars!

OVERVIEW

Condition - New Old Stock*
Model ID - D352
Production Era - 1970s & 1980s
Country - French
Material - Aluminium
Weight - 380 g
Stock Code - D-HB21V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Width (ctc) - 40 cm
Shape - Classic
Clamp Size - 25.4 mm
Drop - 141 mm
Reach - 79 mm
Cable Groove - None

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

View full product details

Piri NOS Vintage Size EU 39 Leather Road Cycling Shoes

£37.50 £50.00

✓ Original vintage cycling shoes - 1960s/70s style!
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Piri cycling shoes in size EU 39, likely made in the 1960s/1970s given the style (yet still new & unused after all this time!). An excellent choice for wearing on your vintage bike (or any occasion you fancy of course), and also a responsible alternative to buying brand new cycling kit!

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong shoes!

OVERVIEW

Shoe Size** - EU 39
Condition - New Old Stock*
Condition Notes - These are unworn but have suffered in storage
Production Era - 1960s & 1970s
Country - French
Stock Code - D-SH3V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

**Most cycling shoes use European sizing but some brands do have conversion charts available. A good rule of thumb, especially with older European shoes is go for a size up as they often come up small. We also provide the length & width, check the help section to see how we measure these.

DETAIL & MEASUREMENTS

Colour* - Black
Upper Material - Leather
Sole Material - Plastic
Shoe Type - Road
Fastening Type - Lace-Up
Length (Heel to Toe) - 25 cm
Width (At Widest Part) - 8 cm

*The colour description is just a guide, please check the photos to get a good idea of the colour too, as we make sure these are as close to the true colour as possible.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Cleat Type - slotted' cleats fit onto traditional pedal cages and the foot is secured with toe clips and straps, various fixings types exist and some are brand specific. Most cleats for clipless road pedals fit the 3 bolt fixing invented by Look in the 80s, the exceptions being the 4 bolt fixing for Time's TBT system (and later Speedplay), and the Podio specific fixings for Merckx shoes. Mountain bike (SPD type) cleats have a standard 2 bolt fixing, and some shoes are even designed to take more than one type of cleat!

Length (Heel to Toe) - measured from the very back of the heel to the front of the toes at their furthest points. We find this measurement useful if you have a similar shape shoe to compare to, and although there will be variation in design, when combined with the width it can be helpful in determining whether the shoes will be a close fit or not.

Width (At Widest Part) - measured across the metatarsal at the widest part of the shoe, on the outside, not the inside.

If you require any further measurements please get in touch.

View full product details

Pitztal Classic Cotton Baseball/Team Cap

£18.00 £20.00

✓ Original classic cap - 2000s style!
✓ Thoroughly checked & honestly graded
✓ Great alternative to buying new
✓ Worldwide shipping

Classic Pitztal baseball/team cap, likely made in the 2000s given the style. An excellent choice for wearing on your classic bike (or any occasion you fancy of course), and also a great alternative to buying brand new cycling kit!

The cap's been thoroughly checked over and graded as good condition. If there are any issues worth noting we’ll do so in the overview section below, but please take a good look at the photos so you can see the condition yourself before you buy.

OVERVIEW

Cap Size** - One Size (Adjustable)
Condition - Good
Production Era - 2000s
Stock Code - U-CAP44C

**Most cycling caps come in ‘one size’ as standard and will fit most head sizes. Some can be on the small side however, so we list these as a ‘smaller fit’ and wouldn’t recommend them for a head circumference above 58 cm.

DETAIL

Cap Type - Baseball/Team
Construction - 5 Panel
Colour* - Red

*The colour description is just a guide, please check the photos to get a good idea of the colour too, as we make sure these are as close to the true colour as possible.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Cap Type - we refer to the classic cycling cap type as summer/under helmet, although they can of course be used all year round. When worn under a helmet they provide comfort, sun protection and are sweat-wicking too. Winter hats will usually cover the ears and are referred to as 'Belgian' caps. Baseball caps were often worn by support teams or sold as branded merchandise.

Construction - the number of panels the cap body is made up of, not including the peak.

View full product details

Pivo Vintage 60 mm 1" French Quill Stem

£41.25 £55.00

✓ Original part - in production from the 1960s to the 1970s
✓ Super lightweight for the era - only 244 grams!
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Pivo stem, hailing from France and in production from the 1960s to the 1970s. Made from aluminium/steel and weighing in at 244 grams - incredibly lightweight for a stem at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong stem!

The stem's been carefully cleaned, thoroughly checked by one of our mechanics and graded as good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.

OVERVIEW

Condition - Good
Production Era - 1960s & 1970s
Country - French
Material - Aluminium/Steel
Weight - 244 g
Stock Code - U-ST99V

TECHNICAL INFO

Extension Length (ctc) - 60 mm
Quill Size - 1" French
Steerer Size (ID) - 22.0 mm (French)
Total Shaft Height - 160 mm
Clamp Size - 25.0 mm

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

Extension Length (ctc) - this is measured from the centre of the handlebar clamp to the centre of the shaft, to the point where the stem bolt passes through. We always take this measurement in a straight line through middle of the extension, not along the top.

Quill Size - the most common size for classic and vintage road bikes is 1", this should be the same as the outside diameter of your fork's steerer column. Oversized steerers found on mountain bikes and later road bikes will be either 1 1/8" or 1 1/4".

Steerer Size (ID) - this is the most important measurement when checking the stem fits your bike. This should match the measurement of the inside of your fork's steerer column, where the stem will be inserted. The standard size for road quill stems was 22.2 mm, or 22.0 mm in France until the 1980s.

Total Shaft Height - measured from the top where the expander bolt head sits, to the bottom of the stem's shaft. To give you an idea of how high the stem can be set, there should be an absolute minimum of 50 mm inserted into the fork steerer, although most stems come with a 'minimum insertion line' to help with this.

Clamp Size - this should match the outside diameter of your handlebars and should be as close as possible to ensure a good and safe fit.

View full product details

Plain White Medium Classic Cycling Jersey

£18.75 £25.00

✓ Original classic jersey - 1990s style!
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & honestly graded
✓ Great alternative to buying new
✓ Worldwide shipping

Plain white short sleeved cycling jersey, hailing from Italy and likely made in the 1990s given the style. An excellent choice for wearing on your vintage bike, and also a responsible alternative to buying brand new cycling kit!

If you're taking part in L'Eroica or a similar vintage event, this is compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong jersey!

The jersey’s been thoroughly checked over and graded as good condition. If there are any issues worth noting we’ll do so in the overview section below, but please take a good look at the photos so you can see the condition yourself before you buy.

OVERVIEW

Size Estimate (Chest)** - Medium (38-42" Chest)
Condition - Good
Condition Notes - Some pulled threads
Material - Polyester
Stock Code - U-JS128C

**This is just an estimate so please check the actual measurements before buying, the best way to get the right fit is to compare them with those of a garment that fits well, and please use all the measurements provided as some classic jerseys can have irregular sizing.

DETAIL & SIZING

Sleeve Type - Short Sleeved
Pit to Pit (Laid Flat) - 49 cm
Top to Bottom (Front) - 64 cm
Top to Bottom (Back) - 73 cm
Shoulder Seam to Sleeve End (Oustide) - 26 cm
Across Neck (Laid Flat) - 19 cm
Across Sleeve End (Laid Flat) - 14 cm

NB: Check the help section to see how we take these measurements to get a good comparison.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

We've also provided photographs below to illustrate how we take our measurements.

Pit to Pit - this measurement is taken from the centre of one armpit to the other, across the chest with the jersey laid flat.

Top to Bottom - this will always be from the very top of the collar to the very bottom hem, we provide measurements for both the front and back, always taken with the jersey laid flat.

Shoulder Seam to Sleeve End - this measurement is taken from the shoulder seam down to the very end of the sleeve on the outside.

Across Neck - for consistency on all neck shapes we gather the front and back together and lay them flat, then measure across the stitching (as shown in the supporting photos).

Across Sleeve End - measured across the sleeve end, laid flat.

View full product details

Plastiche Cassano NOS Vintage White Expanding Handlebar End Plugs

£16.63 £17.50

✓ Original bar plugs - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Plastiche Cassano bar end plugs (or caps, or stoppers if you prefer), hailing from Italy and in production from the 1970s to the 1980s (yet still new & unused after all this time). Made from plastic and weighing in at 22 grams (for the pair). A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bar plugs!

OVERVIEW

Condition - New Old Stock*
Production Era - 1970s & 1980s
Country - Italian
Material - Plastic
Weight - 22 g
Stock Code - D-G6-HST-P42V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO

Colour* - White
Plug Type - Expanding (Screw)
Plug Insert Diameter - 20.5 - 21.5 mm
End Stop Diameter - 26 mm

*The colour description is just a guide, please check the photos too as we make sure these are as close to the true colour as possible.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

This product complies with the EU General Product Safety Regulation (GPSR).

EU Authorised Representative - Global Trade Department NI Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast BT9 6AG, Northern Ireland

Plug Type - expanding plug inserts can be adjusted within the given range to fit different handlebar inner diameters. 'Push-in' plugs cannot do this, however they are usually designed to flex a little to give you some wiggle room.

Plug Insert Diameter - this needs to be a close match to the inside diameter of your handlebars, although the plug diameters can be increased a little using tape (cloth handlebar tape is perfect for this). The ranges given for expanding plugs are rounded to the nearest 0.5 mm.

End Stop Diameter - the width of the end cap that butts up to the ends of your handlebars.

View full product details

Plastiche Cassano Vintage White Expanding Handlebar End Plugs

£11.88 £12.50

✓ Original bar plugs - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Plastiche Cassano bar end plugs (or caps, or stoppers if you prefer), hailing from Italy and in production from the 1970s to the 1980s. Made from plastic and weighing in at 25 grams (for the pair). A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bar plugs!

The plugs have been checked, cleaned and graded as very good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.

OVERVIEW

Condition - Very Good
Production Era - 1970s & 1980s
Country - Italian
Material - Plastic
Weight - 25 g
Stock Code - U-HST-P19V

TECHNICAL INFO

Colour* - White
Plug Type - Expanding (Screw)
Plug Insert Diameter - 20.5 - 21.5 mm
End Stop Diameter - 26 mm

*The colour description is just a guide, please check the photos too as we make sure these are as close to the true colour as possible.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Plug Type - expanding plug inserts can be adjusted within the given range to fit different handlebar inner diameters. 'Push-in' plugs cannot do this, however they are usually designed to flex a little to give you some wiggle room.

Plug Insert Diameter - this needs to be a close match to the inside diameter of your handlebars, although the plug diameters can be increased a little using tape (cloth handlebar tape is perfect for this). The ranges given for expanding plugs are rounded to the nearest 0.5 mm.

End Stop Diameter - the width of the end cap that butts up to the ends of your handlebars.

View full product details

Plastiche Cassano Vintage White Expanding Handlebar End Plugs

£11.88 £12.50

✓ Original bar plugs - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Plastiche Cassano bar end plugs (or caps, or stoppers if you prefer), hailing from Italy and in production from the 1970s to the 1980s. Made from plastic and weighing in at 22 grams (for the pair). A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bar plugs!

The plugs have been checked, cleaned and graded as very good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.

OVERVIEW

Condition - Very Good
Production Era - 1970s & 1980s
Country - Italian
Material - Plastic
Weight - 22 g
Stock Code - U-HST-P20V

TECHNICAL INFO

Colour* - White
Plug Type - Expanding (Screw)
Plug Insert Diameter - 20.5 - 21 mm
End Stop Diameter - 25.5 mm

*The colour description is just a guide, please check the photos too as we make sure these are as close to the true colour as possible.

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.