All

Claud Butler Cr-Mo Tube NOS Classic 120 mm 1 1/4" Quill Stem

£18.75 £25.00

✓ Original part - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Claud Butler Cr-Mo Tube stem, hailing from Great Britain and in production during the 1990s (yet still new & unused after all this time!). Made from steel and weighing in at 440 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Extension Length (ctc)* - we measure from the centre of the handlebar clamp to the centre of the shaft, to the point where the stem bolt passes through, to the nearest 5 mm. We always take this measurement in a straight line through middle of the extension, not along the top. In some cases the stem may be stamped with a different extension length as some manufacturers measured differently, but we always use our own measurement for consitency.

Quill Size - the most common size for classic and vintage road bikes is 1", this should be the same as the outside diameter of your fork's steerer column. Oversized steerers found on mountain bikes and later road bikes will be either 1 1/8" or 1 1/4".

Steerer Size (ID) - this is the most important measurement when checking the stem fits your bike. This should match the measurement of the inside of your fork's steerer column, where the stem will be inserted. The standard size for road quill stems was 22.2 mm, or 22.0 mm in France until the 1980s.

Total Shaft Height - measured from the top where the expander bolt head sits, to the bottom of the stem's shaft. To give you an idea of how high the stem can be set, there should be an absolute minimum of 50 mm inserted into the fork steerer, although most stems come with a 'minimum insertion line' to help with this.

Clamp Size - this should match the outside diameter of your handlebars and should be as close as possible to ensure a good and safe fit.

Co Union Shiny NOS/NIB Vintage Black Vinyl Handlebar Tape

£7.50 £10.00

✓ Original bar tape - in production from the 1970s to the 1980s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Co Union bar tape (or grip, or wrap if you prefer), hailing from Taiwan and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Supplied as shown in the photos, enough tape to cover a set of drop bars. The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or a similar vintage event, this is of the correct era, so rest assured the pre-1987 police won't lock you up for having the wrong handlebar grip!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Cobra NOS Vintage Red Aluminium Bottle Cage / Holder

£18.75 £25.00

✓ Original bottle cage - produced in the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Cobra bottle cage, hailing from Italy and in production during the 1980s (yet still new & unused after all this time!). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too of course!

If you're taking part in L'Eroica or a similar vintage event, this is of the correct era, so rest assured the pre-1987 police won't lock you up for having the wrong bottle carrier!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cage Fixing - most bottle cages will be designed to fix to the frame, although some rare older ones mount to the handlebars and/or stem. If your frame doesn't have any bottle cage braze-ons to fix to you'll need a clamp-on bottle cage.

Bottle Size - almost all cycling bottles measure just under 75 mm in diameter so this is the standard bottle cage size, the only rather rare exceptions are some old Elite bottles that require a 66 mm cage, the more recent oversized ones and of course the funny shaped aero ones that only accept the bottle they were made for.

Cobra Vintage 20-23 mm Seatpost Binder Bolt

£12.75 £15.00

✓ Original part - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Cobra seatpost binder bolt, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 9 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong seatpost binder bolt!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Clamp Opening - the minimum and maximum distance between the inside of the nut and bolt heads. The minimum is measured with the bolt tightened as much as possible (for hex head types this may mean the bolt end will stick quite far out of the nut). For the maximum opening we ensure 5-6 mm of thread remainis in the nut for a secure fixing.

Outer Diameter - the part that goes through the frame, most steel frames will take an 8 mm bolt whereas early lugged aluminium frames often have a larger hole that takes a 10 mm bolt diameter.

Bolt Fixing Type - Some binder bolts have knurled parts that grip the inside of the bolt hole, some have a small notch locator (a "key" that lines up with a cut-out in the frame if yours has one), others have tightening mechanism on both the nut and bolt to secure the seatpost in the frame.

Cobra Vintage Black Aluminium Bottle Cage / Holder

£11.25 £15.00

✓ Original bottle cage - produced in the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Cobra bottle cage, hailing from Italy and in production during the 1980s. The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too of course!

If you're taking part in L'Eroica or a similar vintage event, this is of the correct era, so rest assured the pre-1987 police won't lock you up for having the wrong bottle carrier!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cage Fixing - most bottle cages will be designed to fix to the frame, although some rare older ones mount to the handlebars and/or stem. If your frame doesn't have any bottle cage braze-ons to fix to you'll need a clamp-on bottle cage.

Bottle Size - almost all cycling bottles measure just under 75 mm in diameter so this is the standard bottle cage size, the only rather rare exceptions are some old Elite bottles that require a 66 mm cage, the more recent oversized ones and of course the funny shaped aero ones that only accept the bottle they were made for.

Colnago - Teugels - Just Fit NOS Classic Cotton Cycling Cap

£17.00 £20.00

✓ Original classic cap - 2000s style!
✓ New old stock! Still unused after all these years
✓ Great alternative to buying new
✓ Worldwide shipping

Classic Colnago - Teugels - Just Fit cycling cap, likely made in the 2000s given the style. An excellent choice for wearing on your classic bike (or any occasion you fancy of course), and also a great alternative to buying brand new cycling kit!

OVERVIEW

DETAIL

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cap Type - we refer to the classic cycling cap type as summer/under helmet, although they can of course be used all year round. When worn under a helmet they provide comfort, sun protection and are sweat-wicking too. Winter hats will usually cover the ears and are referred to as 'Belgian' caps. Baseball caps were often worn by support teams or sold as branded merchandise.

Construction - the number of panels the cap body is made up of, not including the peak.

Cosmos TA Style Vintage Black Aluminium Bottle Cage / Holder

£15.00 £20.00

✓ Original bottle cage - produced in the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Cosmos bottle cage, hailing from Italy and in production during the 1980s. The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too of course!

If you're taking part in L'Eroica or a similar vintage event, this is of the correct era, so rest assured the pre-1987 police won't lock you up for having the wrong bottle carrier!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cage Fixing - most bottle cages will be designed to fix to the frame, although some rare older ones mount to the handlebars and/or stem. If your frame doesn't have any bottle cage braze-ons to fix to you'll need a clamp-on bottle cage.

Bottle Size - almost all cycling bottles measure just under 75 mm in diameter so this is the standard bottle cage size, the only rather rare exceptions are some old Elite bottles that require a 66 mm cage, the more recent oversized ones and of course the funny shaped aero ones that only accept the bottle they were made for.

Crane Vintage Short Sleeve Cycling Jersey

£15.00 £25.00

Measurements are taken when laid flat and the length is measured down the back from the bottom of the collar to the bottom of the hem.

NB: We've given a 'snug but comfortable' estimated size as a guide only. Due to the nature of vintage items, it's always best to refer to the actual measurements given, and if possible compare them to another jersey that fits well.

SIZING& CONDITION:

SHIPPING, TAXES & RETURNS

Crane X-System Short Sleeve Vintage Cycling Jersey

£9.00 £15.00

Our jerseys have been sized to be a snug fit. If you prefer a more relaxed fit we suggest going up a size.

Below you'll find precise measurements of the garment when laid flat so you can compare against your favourite fitting jersey. Please make sure to check the length as well as the chest measurement.

The chest is measured across the front only, from armpit to armpit at the seam. The length is measured down the back only, from top of collar to bottom of hem.

SHIPPING, TAXES & RETURNS

Crivit Vintage Short Sleeved Cycling Jersey

£10.00

Pre-washed vintage cycling jersey from days gone by.

All jerseys are sized to be a snug but not super-tight fit. We've also provided actual measurements of the garment when laid flat so you can compare against your favourite fitting jersey. Please make sure the length is long enough, as these are sized using the chest measurement, and sometimes mis-shaping can happen over the years.

The chest is measured across the front, from armpit to armpit at the seam. The length is measured down the back, from top of collar to bottom of hem.

*Our model wears a size medium and is 182cm / 6" tall.

SHIPPING, TAXES & RETURNS

Crivit Vintage Short Sleeved Cycling Jersey

£7.80 £13.00

Pre-washed vintage cycling jersey from days gone by.

All jerseys are sized to be a snug but not super-tight fit. We've also provided actual measurements of the garment when laid flat so you can compare against your favourite fitting jersey. Please make sure the length is long enough, as these are sized using the chest measurement, and sometimes mis-shaping can happen over the years.

The chest is measured across the front, from armpit to armpit at the seam. The length is measured down the back, from top of collar to bottom of hem.

*Our model wears a size medium and is 182cm / 6" tall.

SHIPPING, TAXES & RETURNS

CSF Group - Navigare- Colnago NOS Classic Italian Cotton Cycling Cap

£20.00

✓ Original classic cap - 2000s style!
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Classic CSF Group - Navigare- Colnago cap, likely made in the 2000s given the style. An excellent choice for wearing on your classic bike (or any occasion you fancy of course), and also a great alternative to buying brand new cycling kit!

OVERVIEW

DETAIL

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼SAFETY & COMPLIANCE

---

This product complies with the EU General Product Safety Regulation (GPSR).

EU Authorised Representative - Global Trade Department NI Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast BT9 6AG, Northern Ireland

▼HELP SECTION

---

Cap Type - we refer to the classic cycling cap type as summer/under helmet, although they can of course be used all year round. When worn under a helmet they provide comfort, sun protection and are sweat-wicking too. Winter hats will usually cover the ears and are referred to as 'Belgian' caps. Baseball caps were often worn by support teams or sold as branded merchandise.

Construction - the number of panels the cap body is made up of, not including the peak.

CST Super HP Black/Gum Vintage 700 x 20c Tyres

£23.75 £25.00

✓ Original pair of tyres - produced in the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked over
✓ Worldwide shipping

CST Super HP tyres, hailing from China and in production during the 1980s. Made from rubber and weighing in at 690 grams (the weight and price displayed are for a pair of tyres). A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong tyres!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼SAFETY & COMPLIANCE

---

This product complies with the EU General Product Safety Regulation (GPSR). Professional installation and regular inspections are recommended. Due to the product's age, extra care should be taken during use.

Product Manufacturer - Cheng Shin Rubber, No. 15 Xi Bin Road, Xing Lin Industrial District, Xiamen, Fujian, 361022, China

EU Authorised Representative - Global Trade Department NI Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast BT9 6AG, Northern Ireland

▼HELP SECTION

---

Size - this is the manufacturer’s sizing and must match the size or your wheels. This can be confusing as tyres have had different sizing systems over the years, and there are many (sometimes conflicting) sizes available. For this reason it’s important to check the ISO diameter too for clarification, especially for 26” wheels.

Bike Type - the type of bike the tyres were designed to be used on. Road tyres will generally be narrow with minimal tread, touring tyres wider with a bit more grip in the tread, and cyclocross & MTB tyres wider still (especially the latter), with a much more pronounced tread pattern.

ISO Diameter - this relates to the diameter of the wheel rims at the point where the tyres are seated (bead seat diameter). This is a universal measurement, often displayed on tyres as 28-622 or similar, 28 referring to the tyre width and 622 being the ISO diameter in millimetres.

TPI - stands for threads per inch and refers to the thread count of the tyre casings. A high thread count usually means more supple and lighter tyres, this can be anything as high as 320 tpi. We can’t always provide this information however, as it’s not always possible to know for sure.

DDK Black Saddle

£11.25 £15.00

✓ Thoroughly checked & photographed in detail
✓ Timeless design - for original or retro styled bikes
✓ Worldwide shipping

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

De Marchi iPhone 5s / 5 Leather Case

£15.00

Synthetic leather iPhone case from the fantastic Italian manufacturer De Marchi. The inside is lined with a soft microfibre for protection. Fits all iPhone 5 models.

SHIPPING, TAXES & RETURNS

Decca Bouwwerken Beernaert Fr. Staden Small Vintage Cycling Jersey

£22.50 £30.00

✓ Original vintage jersey - 1980s style!
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & honestly graded
✓ Great alternative to buying new
✓ Worldwide shipping

Decca Bouwwerken Beernaert Fr. Staden short sleeved cycling jersey, hailing from Belgium and likely made in the 1980s given the style. An excellent choice for wearing on your vintage bike, and also a responsible alternative to buying brand new cycling kit!

If you're taking part in L'Eroica or a similar vintage event, this is compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong jersey!

OVERVIEW

DETAIL & SIZING

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

We've also provided photographs below to illustrate how we take our measurements.

Pit to Pit - this measurement is taken from the centre of one armpit to the other, across the chest with the jersey laid flat.

Top to Bottom - this will always be from the very top of the collar to the very bottom hem, we provide measurements for both the front and back, always taken with the jersey laid flat.

Shoulder Seam to Sleeve End - this measurement is taken from the shoulder seam down to the very end of the sleeve on the outside.

Across Neck - for consistency on all neck shapes we gather the front and back together and lay them flat, then measure across the stitching (as shown in the supporting photos).

Across Sleeve End - measured across the sleeve end, laid flat.

Del Tongo Colnago Cycling Cap

£12.50

SIZING, CONDITION & MATERIAL

Material: 35% Cotton / 65% Polyseter
Size: One Size
Condition: New

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, normally within 2-3 days, but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

Dia-Compe Vintage Caliper Brake Pads

£19.00 £20.00

✓ Original brake pads - produced in the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & photographed in detail
✓ Worldwide shipping

Dia-Compe rim brake pads (or blocks, or shoes if you prefer), hailing from Japan and in production during the 1980s. Weighing in at 38 grams (the weight and price displayed is for 2 pads). A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong brake pads!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Position - some brake pads are designed for front or rear use only, although most can be used on either. If they are front or rear specific they should only be used in that position.

Brake Fit - brake pads are specific to the type of brake so you need to use the correct ones.

Pad Type - replaceable (also known as cartridge) brake pads have inserts that can be replaced once they wear out. With one piece pads you do not have this option.

Rim Type - some wheel rims such as ceramic or carbon require brake pads to be made of specific compounds. If you have steel rims you can use pads designed for alloy rims but you will get much better performance when using the correct pads.

Digel Short Sleeve Full Zip Vintage Cycling Jersey

£21.00 £35.00

Our jerseys have been sized to be a snug fit. If you prefer a more relaxed fit we suggest going up a size.

Below you'll find precise measurements of the garment when laid flat so you can compare against your favourite fitting jersey. Please make sure to check the length as well as the chest measurement.

The chest is measured across the front only, from armpit to armpit at the seam. The length is measured down the back only, from top of collar to bottom of hem.

SHIPPING, TAXES & RETURNS

Double Speed Short Sleeve Vintage Cycling Jersey

£7.20 £12.00

Our jerseys have been sized to be a snug fit. If you prefer a more relaxed fit we suggest going up a size.

Below you'll find precise measurements of the garment when laid flat so you can compare against your favourite fitting jersey. Please make sure to check the length as well as the chest measurement.

The chest is measured across the front only, from armpit to armpit at the seam. The length is measured down the back only, from top of collar to bottom of hem.

SHIPPING, TAXES & RETURNS

DPS Celo-Nastro Professionale 'Cello' NOS/NIB Vintage Black Textured Handlebar Tape

£22.50 £30.00

✓ Original bar tape - in production from the 1970s to the 1980s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

DPS Celo-Nastro Professionale bar tape (or grip, or wrap if you prefer), hailing from Italy and in production from the 1970s to the 1980s (yet still new & unused after all this time!). Supplied as shown in the photos, enough tape to cover a set of drop bars. The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or a similar vintage event, this is of the correct era, so rest assured the pre-1987 police won't lock you up for having the wrong handlebar grip!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Eick Neon / Black and White Medium Vintage Cycling Jersey

£22.50 £30.00

✓ Original vintage jersey - 1980s/90s style!
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & honestly graded
✓ Great alternative to buying new
✓ Worldwide shipping

Eick short sleeved cycling jersey, likely made in the 1980s/1990s given the style. An excellent choice for wearing on your vintage bike, and also a responsible alternative to buying brand new cycling kit!

If you're taking part in L'Eroica or a similar vintage event, this is compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong jersey!

OVERVIEW

DETAIL & SIZING

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

We've also provided photographs below to illustrate how we take our measurements.

Pit to Pit - this measurement is taken from the centre of one armpit to the other, across the chest with the jersey laid flat.

Top to Bottom - this will always be from the very top of the collar to the very bottom hem, we provide measurements for both the front and back, always taken with the jersey laid flat.

Shoulder Seam to Sleeve End - this measurement is taken from the shoulder seam down to the very end of the sleeve on the outside.

Across Neck - for consistency on all neck shapes we gather the front and back together and lay them flat, then measure across the stitching (as shown in the supporting photos).

Across Sleeve End - measured across the sleeve end, laid flat.

Ekla NOS/NIB Vintage Brake Cable Inner

£6.75 £7.50

✓ Original cable - in production from the 1960s to the 1980s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Ekla inner cable (or wire if you prefer), hailing from France and in production from the 1960s to the 1980s (yet still new & unused after all this time). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cable!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Position - rear cables need to be longer than fronts, this is the only difference so cables long enough for the rear can also be used on the front.

Cable Type - brake and gear cables have different specifications and are not interchangeable.

Length - it's important to check the cable is long enough for your setup. Some gear cables are designed for downtube gear levers only and there won't be enough cable to be used otherwise.

End Nipple Type - only relevant for brake cables. 'Pear' type cable ends step down in size to allow them to be used with drop bar levers normally found on road bikes, whereas flat bar levers usually require a 'barrel' end that sits in a similar shape slot within the brake levers.

End Diameter - for 'pear' type ends this is the diameter at its widest part, with barrel ends it's the diameter of the circular part.

Ekla NOS/NIB Vintage Campagnolo Road Gear Shifter Cable Inner

£7.65 £8.50

✓ Original cable - in production from the 1960s to the 1980s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Ekla inner cable (or wire if you prefer), hailing from Belgium and in production from the 1960s to the 1980s (yet still new & unused after all this time). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cable!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Position - rear cables need to be longer than fronts, this is the only difference so cables long enough for the rear can also be used on the front.

Cable Type - brake and gear cables have different specifications and are not interchangeable.

Length - it's important to check the cable is long enough for your setup. Some gear cables are designed for downtube gear levers only and there won't be enough cable to be used otherwise.

End Nipple Type - only relevant for brake cables. 'Pear' type cable ends step down in size to allow them to be used with drop bar levers normally found on road bikes, whereas flat bar levers usually require a 'barrel' end that sits in a similar shape slot within the brake levers.

End Diameter - for 'pear' type ends this is the diameter at its widest part, with barrel ends it's the diameter of the circular part.

Ekla NOS/NIB Vintage Campagnolo Road Gear Shifter Cable Inners

£14.25 £15.00

✓ Original cables - in production from the 1960s to the 1980s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Ekla set of 2 inner cables (or wires if you prefer), hailing from Belgium and in production from the 1960s to the 1980s (yet still new & unused after all this time). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or any other vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cables!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cable Type - brake and gear cables have different specifications and are not interchangeable.

Length (F/R) - it's important to check the cables are long enough for your setup. Some gear cables are designed for downtube gear levers only and there won't be enough cable to be used otherwise.

End Nipple Type - only relevant for brake cables. 'Pear' type cable ends step down in size to allow them to be used with drop bar levers normally found on road bikes, whereas flat bar levers usually require a 'barrel' end that sits in a similar shape slot within the brake levers.

End Diameter - for 'pear' type ends this is the diameter at its widest part, with barrel ends it's the diameter of the circular part.

Ekla NOS/NIB Vintage Front Brake Cable Inner

£6.50

✓ Original cable - in production from the 1950s to the 1980s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Ekla inner cable (or wire if you prefer), hailing from France and in production from the 1950s to the 1970s (yet still new & unused after all this time). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cable!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Position - rear cables need to be longer than fronts, this is the only difference so cables long enough for the rear can also be used on the front.

Cable Type - brake and gear cables have different specifications and are not interchangeable.

Length - it's important to check the cable is long enough for your setup. Some gear cables are designed for downtube gear levers only and there won't be enough cable to be used otherwise.

End Nipple Type - only relevant for brake cables. 'Pear' type cable ends step down in size to allow them to be used with drop bar levers normally found on road bikes, whereas flat bar levers usually require a 'barrel' end that sits in a similar shape slot within the brake levers.

End Diameter - for 'pear' type ends this is the diameter at its widest part, with barrel ends it's the diameter of the circular part.

Ekla NOS/NIB Vintage Road Brake Cable Inner

£6.75 £7.50

✓ Original cable - in production from the 1950s to the 1980s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Ekla inner cable (or wire if you prefer), hailing from France and in production from the 1950s to the 1970s (yet still new & unused after all this time). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cable!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Position - rear cables need to be longer than fronts, this is the only difference so cables long enough for the rear can also be used on the front.

Cable Type - brake and gear cables have different specifications and are not interchangeable.

Length - it's important to check the cable is long enough for your setup. Some gear cables are designed for downtube gear levers only and there won't be enough cable to be used otherwise.

End Nipple Type - only relevant for brake cables. 'Pear' type cable ends step down in size to allow them to be used with drop bar levers normally found on road bikes, whereas flat bar levers usually require a 'barrel' end that sits in a similar shape slot within the brake levers.

End Diameter - for 'pear' type ends this is the diameter at its widest part, with barrel ends it's the diameter of the circular part.

Elite Eclipse Classic Strapless Plastic Toe Clips

£12.50

✓ Original toe clips - produced in the 1990s
✓ Checked & cleaned
✓ Worldwide shipping

Elite Eclipse toe clips (or pedal cages if you prefer), hailing from Italy and in production during the 1990s. Made from plastic and weighing in at 110 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.

OVERVIEW

**This is a guide based on traditional toe clip sizing for cycling shoes of the time, if you ride with chunkier shoes then we'd recommend going for a larger size. Please use this as a guide only and if possible use the length measurement provided to compare with toe clips you know fit well.

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼SAFETY & COMPLIANCE

---

This product complies with the EU General Product Safety Regulation (GPSR). Due to the product's age, extra care should be taken during installation and use.

Product Manufacturer - Frassene SRL - Via C. Agostini, 80/A, San Martino di Lupari, 35018 (PD), Italy

EU Authorised Representative - Global Trade Department NI Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast BT9 6AG, Northern Ireland

▼HELP SECTION

---

Pedal Fixing - 'standard' toe clips fix to the front of the pedals, most will be of this type and work with both quill & platform pedals providing they have mounting holes in the correct place. There are also 'aero' ones that attach to the top, and side fixing versions too. 'Wide platform' fixings are similar to standard ones but the fixing holes are almost 3 inches apart.

Toe Strap Fit - most toe clips are designed to accept a single toe strap, but there are some less common ones that allow two toe straps to be fitted.

Length - this is measured from the fixing end to the toe end at the most extreme points, the same way the manufacturers measure and we use this to recommend the fit if there's no size stamped on them. All length measurements are rounded to the nearest 0.5 cm.

Distance Between Fixing Bolts - we measure this distance from the centre of one hole to the next (ctc), this usually only needs to be close, not exact, providing the holes on the toe clips are oblong shaped to allow a decent amount of wiggle room (most toe clips are made this way).

Elite New 66 NOS Classic 500 ml 66 mm Water Bottle

£20.00

✓ Original water bottle - in production from the 1990s to the 2000s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Elite New 66 water bottle, hailing from Italy and in production from the 1990s to the 2000s (yet still new & unused after all this time!). The perfect finishing touch for your classic bike, but great for bikes of the non-classic variety too of course!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Capacity - 500ml used to be the standard sized bottle, but the taller modern versions tend to be 750ml.

Bottle width - almost all bottle cages take a 75 mm bottle width, the only rather rare exceptions are some old Elite cages that take a 66 mm bottle (and of course the funny shaped aero ones).

Elite Peugeot-Look Team NOS Classic 750 ml Water Bottle

£11.25 £15.00

✓ Original water bottle - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Elite Peugeot-Look Team water bottle, hailing from Italy and in production during the 1990s (yet still new & unused after all this time!). An excellent choice for classic cycling enthusiasts, but great for cyclists of the non-classic variety too of course!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

▼HELP SECTION

---

Capacity - 500ml used to be the standard sized bottle, but the taller modern versions tend to be 750ml.

Bottle width - almost all bottle cages take a 75 mm bottle width, the only rather rare exceptions are some old Elite cages that take a 66 mm bottle (and of course the funny shaped aero ones).

Elite Saeco NOS Classic 500 ml 66 mm Water Bottle

£20.00

✓ Original water bottle - in production from the 1990s to the 2000s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Elite Saeco water bottle, hailing from Italy and in production from the 1990s to the 2000s (yet still new & unused after all this time!). The perfect finishing touch for your classic bike, but great for bikes of the non-classic variety too of course!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Capacity - 500ml used to be the standard sized bottle, but the taller modern versions tend to be 750ml.

Bottle width - almost all bottle cages take a 75 mm bottle width, the only rather rare exceptions are some old Elite cages that take a 66 mm bottle (and of course the funny shaped aero ones).

Eltra NOS/NIB Vintage Road Brake Cable Inner

£6.75 £7.50

✓ Original cable - produced in the 1980s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Eltra inner cable (or wire if you prefer), hailing from The Netherlands and in production during the 1980s (yet still new & unused after all this time). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cable!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Position - rear cables need to be longer than fronts, this is the only difference so cables long enough for the rear can also be used on the front.

Cable Type - brake and gear cables have different specifications and are not interchangeable.

Length - it's important to check the cable is long enough for your setup. Some gear cables are designed for downtube gear levers only and there won't be enough cable to be used otherwise.

End Nipple Type - only relevant for brake cables. 'Pear' type cable ends step down in size to allow them to be used with drop bar levers normally found on road bikes, whereas flat bar levers usually require a 'barrel' end that sits in a similar shape slot within the brake levers.

End Diameter - for 'pear' type ends this is the diameter at its widest part, with barrel ends it's the diameter of the circular part.

Eltra Weinmann Sport NOS Vintage Front Brake Cable Inner

£6.75 £7.50

✓ Original cable - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Eltra inner cable (or wire if you prefer), hailing from The Netherlands and in production from the 1970s to the 1980s (yet still new & unused after all this time). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cable!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Position - rear cables need to be longer than fronts, this is the only difference so cables long enough for the rear can also be used on the front.

Cable Type - brake and gear cables have different specifications and are not interchangeable.

Length - it's important to check the cable is long enough for your setup. Some gear cables are designed for downtube gear levers only and there won't be enough cable to be used otherwise.

End Nipple Type - only relevant for brake cables. 'Pear' type cable ends step down in size to allow them to be used with drop bar levers normally found on road bikes, whereas flat bar levers usually require a 'barrel' end that sits in a similar shape slot within the brake levers.

End Diameter - for 'pear' type ends this is the diameter at its widest part, with barrel ends it's the diameter of the circular part.

Elvedes NOS/NIB Vintage Brake Cable Inner

£6.75 £7.50

✓ Original cable - in production from the 1980s to the 1990s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Elvedes inner cable (or wire if you prefer), hailing from The Netherlands and in production from the 1980s to the 1990s (yet still new & unused after all this time). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cable!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Position - rear cables need to be longer than fronts, this is the only difference so cables long enough for the rear can also be used on the front.

Cable Type - brake and gear cables have different specifications and are not interchangeable.

Length - it's important to check the cable is long enough for your setup. Some gear cables are designed for downtube gear levers only and there won't be enough cable to be used otherwise.

End Nipple Type - only relevant for brake cables. 'Pear' type cable ends step down in size to allow them to be used with drop bar levers normally found on road bikes, whereas flat bar levers usually require a 'barrel' end that sits in a similar shape slot within the brake levers.

End Diameter - for 'pear' type ends this is the diameter at its widest part, with barrel ends it's the diameter of the circular part.

Elvedes NOS/NIB Vintage Gear Shifter Cable Inner

£7.65 £8.50

✓ Original cable - in production from the 1970s to the 1980s
✓ New old stock & still in the original packaging!
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Elvedes inner cable (or wire if you prefer), hailing from The Netherlands and in production from the 1970s to the 1980s (yet still new & unused after all this time). The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong cable!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Position - rear cables need to be longer than fronts, this is the only difference so cables long enough for the rear can also be used on the front.

Cable Type - brake and gear cables have different specifications and are not interchangeable.

Length - it's important to check the cable is long enough for your setup. Some gear cables are designed for downtube gear levers only and there won't be enough cable to be used otherwise.

End Nipple Type - only relevant for brake cables. 'Pear' type cable ends step down in size to allow them to be used with drop bar levers normally found on road bikes, whereas flat bar levers usually require a 'barrel' end that sits in a similar shape slot within the brake levers.

End Diameter - for 'pear' type ends this is the diameter at its widest part, with barrel ends it's the diameter of the circular part.

Emmepi TA Style Vintage Black Bottle Cage

£22.50 £25.00

✓ Original bottle cage - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Emmepi water bottle cage (or bidon holder if you prefer), hailing from Italy and in production from the 1970s to the 1980s. Made from aluminium and weighing in at 44 grams. The perfect finishing touch for your vintage bike, but great for bikes of the non-vintage variety too!

If you're taking part in L'Eroica or a similar vintage event, this is of the correct era, so rest assured the pre-1987 police won't lock you up for having the wrong bottle carrier!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cage Fixing - most bottle cages will be designed to fix to the frame, although some rare older ones mount to the handlebars and/or stem. If your frame doesn't have any bottle cage braze-ons to fix to you'll need a clamp-on bottle cage.

Bottle Fit - almost all cycling bottles measure between 70 - 75 mm in diameter so this is the standard bottle cage size, the only rather rare exceptions are some old Elite bottles that require a 66 mm cage, the more recent oversized ones and of course the funny shaped aero ones that only accept the bottle they were made for.

Faemino Cycling Cap

£12.50

SIZING & MATERIAL:

SHIPPING, TAXES & RETURNS

FAG Kinex Kompact NOS Classic English 113 mm JIS Bottom Bracket

£22.50 £30.00

✓ Original part - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Lightweight for the era - just 275 grams
✓ Worldwide shipping

FAG Kinex Kompact bottom bracket, hailing from Switzerland and in production during the 1990s (yet still new & unused after all this time!). Made from plastic/steel and weighing in at 275 grams - pretty lightweight for a bottom bracket at that time. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Thread Type - this must match the bottom bracket thread on your frame. The 3 common thread types on classic and vintage bikes are English (also known as British or ISO), Italian & French, and are usually (not always!) found on frames built in their respective countries. If you're replacing a bottom bracket the cups should have the thread type stamped on one of them, if not there are a couple of things to look at; bottom bracket shell width (English & French = 68 mm, Italian = 70 mm) & drive side cup thread direction (English = left, Italian & French = right). The only curveball to watch out for here, although pretty uncommon, are Swiss threads (also found on some French frames, Motobecanes being one) which will have the same shell width & thread direction as an English thread frame but the actual thread pitch will be different. If none of the above matches what you have, there are a few lesser known varieties that will require some further research.

Axle Length - your crankset dictates the axle length you need and the recommendation should be used to avoid issues with chainline. If you're replacing a bottom bracket that works perfectly then this can be matched, otherwise you'll need to check the manufacturers spec, a good resource for older bikes is Velobase.

Axle Type - you can tell which type of axle you need by looking at the shape of the bottom bracket hole in your crankset. For square tapers, the ISO introduced a standard for European makers in the early 90s, JIS then did the same in Asia. Before then it was not so simple, and although there is a degree of interchangeability, the best way to make sure you have the right axle is to stick to the same brand from the same era, ideally the proprietary model.

Fast Bike Notes Large Vintage Cycling Jersey

£22.50 £30.00

✓ Original vintage jersey - 1980s style!
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & honestly graded
✓ Great alternative to buying new
✓ Worldwide shipping

Fast Bike Notes short sleeved cycling jersey, likely made in the 1980s given the style. An excellent choice for wearing on your vintage bike, and also a responsible alternative to buying brand new cycling kit!

If you're taking part in L'Eroica or a similar vintage event, this is compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong jersey!

OVERVIEW

DETAIL & SIZING

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

We've also provided photographs below to illustrate how we take our measurements.

Pit to Pit - this measurement is taken from the centre of one armpit to the other, across the chest with the jersey laid flat.

Top to Bottom - this will always be from the very top of the collar to the very bottom hem, we provide measurements for both the front and back, always taken with the jersey laid flat.

Shoulder Seam to Sleeve End - this measurement is taken from the shoulder seam down to the very end of the sleeve on the outside.

Across Neck - for consistency on all neck shapes we gather the front and back together and lay them flat, then measure across the stitching (as shown in the supporting photos).

Across Sleeve End - measured across the sleeve end, laid flat.

Fietsen Gary NOS Classic Italian Cotton Cycling Cap

£14.50

✓ Original classic cap - 1990s style!
✓ New old stock! Still unused after all these years
✓ Great alternative to buying new
✓ Worldwide shipping

Classic Fietsen Gary cycling cap, hailing from Italy and likely made in the 1990s given the style (yet still new & unused after all this time!). An excellent choice for wearing on your classic bike (or any occasion you fancy of course), and also a great alternative to buying brand new cycling kit!

OVERVIEW

DETAIL

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cap Type - we refer to the classic cycling cap type as summer/under helmet, although they can of course be used all year round. When worn under a helmet they provide comfort, sun protection and are sweat-wicking too. Winter hats will usually cover the ears and are referred to as 'Belgian' caps. Baseball caps were often worn by support teams or sold as branded merchandise.

Construction - the number of panels the cap body is made up of, not including the peak.

Fletsen Wendelen Hasselt - Vintage Woollen Style Cycling Jersey

£21.00 £35.00

Our jerseys have been sized to be a snug fit. If you prefer a more relaxed fit we suggest going up a size.

Below you'll find precise measurements of the garment when laid flat so you can compare against your favourite fitting jersey. Please make sure to check the length as well as the chest measurement.

The chest is measured across the front only, from armpit to armpit at the seam. The length is measured down the back only, from top of collar to bottom of hem.

SHIPPING, TAXES & RETURNS

Freeway ATB Black / Gold Splatter NOS/NIB Steel Vintage 560 mm Flat/Straight Handlebars

£18.75 £25.00

✓ Original bars - in production from the 1980s to the 1990s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping

Freeway handlebars, hailing from Taiwan and in production from the 1980s to the 1990s (yet still new & unused after all this time!). Made from steel and weighing in at 420 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Width - the total width at its widest point, from end to end, rounded to the nearest cm.

Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.

Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.

Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.

Freeway ATB Blue / Pink Splatter NOS/NIB Steel Vintage 560 mm Flat/Straight Handlebars

£23.75

✓ Original bars - in production from the 1980s to the 1990s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping

Freeway handlebars, hailing from Taiwan and in production from the 1980s to the 1990s (yet still new & unused after all this time!). Made from steel and weighing in at 420 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Width - the total width at its widest point, from end to end, rounded to the nearest cm.

Clamp Size - this should match the internal diameter of your handlebar stem clamp, and should be as close as possible to ensure a good and safe fit.

Grip Diameter - the outside diameter of the area where handlebar grips are fitted, this determines not only what grips will fit but brake levers too so it's important to check if you have a specific setup in mind.

Rise/Drop - we measure this at the end of the bars, from the centre point of the clamp area to the centre of the end. This measurent can change when the bar is rotated so there is a bit of tolerance here, please use this as an approximate measurement only.

Freeway NOS/NIB Classic Multi Coloured Frame Bag

£17.50

✓ Original frame bag - produced in the 1990s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping

Freeway triangle frame bag, hailing from Taiwan and in production during the 1990s (yet still new & unused after all this time). An excellent choice for classic bikes, but great for bikes of the non-classic variety too!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Freeway NOS/NIB Classic Neon Yellow Frame Bag

£11.25 £12.50

✓ Original frame bag - produced in the 1990s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping

Freeway triangle frame bag, hailing from Taiwan and in production during the 1990s (yet still new & unused after all this time). An excellent choice for classic bikes, but great for bikes of the non-classic variety too!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

Fujita Vintage Black Expanding Handlebar End Plugs

£19.00 £20.00

✓ Original bar plugs - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Fujita bar end plugs (or caps, or stoppers if you prefer), hailing from Japan and in production from the 1970s to the 1980s. Made from plastic and weighing in at 23 grams (for the pair). A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bar plugs!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Plug Type - expanding plug inserts can be adjusted within the given range to fit different handlebar inner diameters. 'Push-in' plugs cannot do this, however they are usually designed to flex a little to give you some wiggle room.

Plug Insert Diameter - this needs to be a close match to the inside diameter of your handlebars, although the plug diameters can be increased a little using tape (cloth handlebar tape is perfect for this). The ranges given for expanding plugs are rounded to the nearest 0.5 mm.

End Stop Diameter - the width of the end cap that butts up to the ends of your handlebars.

GEM Vintage White Handlebar End Plugs

£11.88 £12.50

✓ Original bar plugs - produced in the 1970s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

GEM bar end plugs (or caps, or stoppers if you prefer), hailing from Great Britain and in production during the 1970s. Made from rubber and weighing in at 15 grams (for the pair). A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bar plugs!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance. We normally despatch orders on Tuesdays and Fridays, although larger items may occasionally take an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers - for orders under €150 (excluding delivery), import VAT and the new €3 customs duty are paid as part of your order - nothing further to pay on delivery! For all other orders, import fees will be payable to the carrier before delivery, with nothing collected at checkout.

USA Customers - import fees are now collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other International Customers - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Plug Type - expanding plug inserts can be adjusted within the given range to fit different handlebar inner diameters. 'Push-in' plugs cannot do this, however they are usually designed to flex a little to give you some wiggle room.

Plug Insert Diameter - this needs to be a close match to the inside diameter of your handlebars, although the plug diameters can be increased a little using tape (cloth handlebar tape is perfect for this). The ranges given for expanding plugs are rounded to the nearest 0.5 mm.

End Stop Diameter - the width of the end cap that butts up to the ends of your handlebars.

GEM Vintage White Handlebar End Plugs

£14.25 £15.00

✓ Original bar plugs - produced in the 1970s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

GEM bar end plugs (or caps, or stoppers if you prefer), hailing from Great Britain and in production during the 1970s. Made from rubber and weighing in at 16 grams (for the pair). A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong bar plugs!

OVERVIEW