MAFAC
MAFAC Vintage Brake Levers
£55.00
These vintage MAFAC brake levers were produced in the 1950s / 1960s and weigh in at 174 grams. They're designed to be used on drop handlebars with an outside diameter of 23.8 mm.
The brake levers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION
Type - Drop Bar
Cable Routing - Non-Aero
Clamp Size - 23.8 mm
Body Condition - OK
Hood Condition - No Hoods
Weight - 174 grams
Era - 1950s / 1960s
SHIPPING, TAXES & RETURNS
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import duties to pay upon receipt (even with the new post-Brexit trade deals, some countries may still charge you import VAT & clearance fees, so please bear this in mind when purchasing).
View full product details
MAFAC Vintage Brake Levers
£55.00
These vintage MAFAC brake levers were produced in the 1960s / 1970s and weigh in at 189 grams. They're designed to be used with drop handlebars with an outside diameter of 24.0 mm.
The brake levers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION
Type - Drop Bar
Cable Routing - Non-Aero
Clamp Size - 24.0 mm
Body Condition - Good
Hood Condition - No Hoods
Weight - 189 grams
Era - 1960s / 1970s
SHIPPING, TAXES & RETURNS
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import duties to pay upon receipt (even with the new post-Brexit trade deals, some countries may still charge you import VAT & clearance fees, so please bear this in mind when purchasing).
View full product details
Mafac Course 121 Vintage Non-Aero Drop Bar Brake Levers
£65.00
✓ Original levers - in production from the 1950s to the 1960s
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & cleaned
✓ Worldwide shipping
Mafac Course 121 brake levers, hailing from France and in production from the 1950s to the 1960s. Made from aluminium/rubber and weighing in at 215 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.
If you're taking part in L'Eroica or any other vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong brake levers!
The brake levers have been cleaned, checked by one of our mechanics and graded as very good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.OVERVIEW
Production Era - 1950s & 1960s
Country - French
Material - Aluminium/Rubber
Weight - 215 g
Stock Code- U-LEV-D10V
TECHNICAL INFO
Cable Routing - Non-Aero
Bar Clamp Size - 23.8 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay (even with the new post-Brexit trade deals, some countries may charge you import VAT & clearance fees so please bear this in mind when purchasing).
MAFAC Course Vintage Brake Levers
£35.00
These vintage MAFAC brake levers were produced in the 1970s and weigh in at 149 grams. They're designed to be used on drop handlebars with an outside diameter of 24.2 mm.
The brake levers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION
Type - Drop Bar
Cable Routing - Non-Aero
Clamp Size - 24.2 mm
Body Condition - Good
Hood Condition - No Hoods
Weight - 149 grams
Era - 1970s
SHIPPING, TAXES & RETURNS
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import duties to pay upon receipt (even with the new post-Brexit trade deals, some countries may still charge you import VAT & clearance fees, so please bear this in mind when purchasing).
View full product details
MAFAC Ville Vintage Brake Levers
£45.00
These vintage MAFAC brake levers were produced in the 1970s and weigh in at 160 grams. They're designed to be used on flat/town handlebars with an outside diameter of 23 mm.
The brake levers have been professionally checked, cleaned & carefully photographed to show the cosmetic condition. Please ensure to take a close look as these are vintage parts (you can enlarge or zoom into the photos).
TECHNICAL INFO & CONDITION
Type - Flat/Town Bar
Cable Routing - Standard
Clamp Size - 23 mm
Body Condition - Good
Hood Condition - No Hoods
Weight - 160 grams
Era - 1970s
SHIPPING, TAXES & RETURNS
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import duties to pay upon receipt (even with the new post-Brexit trade deals, some countries may still charge you import VAT & clearance fees, so please bear this in mind when purchasing).
View full product details
Mafac Vintage Brake Levers
£30.00
Non-Aero cable routing allows the cables to come out of the top of the brake levers, aero routing sends the cables under the handlebar tape.
Most drop bar brake levers will have a clamp size of between 23.8 - 24.2mm and will fit most drop handlebars, the exception generally being older British & French handlebars that sometimes require a 22.2mm clamp size.
Flat bars (such as Risers, French Porteur bars, Moustache bars etc) will require the correct clamp size to match (usually either 22.2mm or 23.8mm).
Please check the photos & table below for sizings & condition.
TECHNICAL INFO & CONDITION
| Cable Routing: | Non-Aero |
| Clamp Size: | 23.8mm - 24.2mm |
| Body Condition: | Very Good (Missing Cables Adjusters) |
| Hood Condition: | Very Good |
SHIPPING, TAXES & RETURNS
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import duties to pay upon receipt (even with the new post-Brexit trade deals, some countries may still charge you import VAT & clearance fees, so please bear this in mind when purchasing).
View full product details
Mafac Vintage Brake Levers
£35.00
Non-Aero cable routing allows the cables to come out of the top of the brake levers, aero routing sends the cables under the handlebar tape.
Most drop bar brake levers will have a clamp size of between 23.8 - 24.2mm and will fit most drop handlebars, the exception generally being older British & French handlebars that sometimes require a 22.2mm clamp size.
Flat bars (such as Risers, French Porteur bars, Moustache bars etc) will require the correct clamp size to match (usually either 22.2mm or 23.8mm).
Please check the photos & table below for sizings & condition.
TECHNICAL INFO & CONDITION
| Cable Routing: | Non-Aero |
| Clamp Size: | 23.8 - 24.2 |
| Body Condition: | OK |
| Hood Condition: | N/A |
SHIPPING, TAXES & RETURNS
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import duties to pay upon receipt (even with the new post-Brexit trade deals, some countries may still charge you import VAT & clearance fees, so please bear this in mind when purchasing).
View full product details
Mafac Vintage Brake Levers
£45.00
Non-Aero cable routing allows the cables to come out of the top of the brake levers, aero routing sends the cables under the handlebar tape.
Most drop bar brake levers will have a clamp size of between 23.8 - 24.2mm and will fit most drop handlebars, the exception generally being older British & French handlebars that sometimes require a 22.2mm clamp size.
Flat bars (such as Risers, French Porteur bars, Moustache bars etc) will require the correct clamp size to match (usually either 22.2mm or 23.8mm).
Please check the photos & table below for sizings & condition.
TECHNICAL INFO & CONDITION
| Cable Routing: | Aero |
| Clamp Size: | 23.8 - 24.2mm |
| Body Condition: | Good |
| Hood Condition: | OK |
SHIPPING, TAXES & RETURNS
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import duties to pay upon receipt (even with the new post-Brexit trade deals, some countries may still charge you import VAT & clearance fees, so please bear this in mind when purchasing).
View full product details
Mafac Vintage Non-Aero Drop Bar Brake Levers
£35.00
✓ Original levers - produced in the 1970s
✓ Super lightweight for the era - only 147 grams!
✓ Suitable for historic cycling events such as L'Eroica
✓ Thoroughly checked & cleaned
✓ Worldwide shipping
Mafac brake levers, hailing from France and in production during the 1970s. Made from aluminium/plastic and weighing in at 147 grams - incredibly lightweight for brake levers at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.
If you're taking part in L'Eroica or any other vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong brake levers!
The brake levers have been cleaned, checked by one of our mechanics and graded as OK condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.OVERVIEW
Production Era - 1970s
Country - French
Material - Aluminium/Plastic
Weight - 147 g
Stock Code- U-LEV-D17V
TECHNICAL INFO
Cable Routing - Non-Aero
Bar Clamp Size - 24.0 mm
-
▼SHIPPING, TAXES & RETURNS
-
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 working days but larger items can often take a little longer to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay (even with the new post-Brexit trade deals, some countries may charge you import VAT & clearance fees so please bear this in mind when purchasing).