£275.00
Dilecta are one of the lesser known french marques, most likely due to the demise of production during the 1950s. The company began life way back, during 1913 in central France. As was the fashion back then they built both bicycles & motorcycles, and during the first half of the 20th century Dilecta were the sponsor of a successful racing team, winning many titles including Paris-Roubaix, Tour of Flanders & Paris-Le Havre. After the unfortunate assassination of the company's founder Albert Chichery in 1944, this bicycle maker began to fade into history as it finally closed its doors in 1956.
This delightful 1940s or 50s Dilecta frame is likely a 'Tourisme' model and is built in the low slung berceau (cradle) style. This would have been a high end but practical bike back then, offering a complete package of mutiple gears, mudguards and luggage carrying capacity all wrapped up in a typically chic and stylish two tone paint job. The frame is designed around the recently resurgent 650B wheel size and will take a lovely wide tyre, it would make a wonderful retro-mod town bike
If you're taking part in L'Eroica or a similar vintage event, this frame is of the correct age, so you won't be disqualified for being a rule breaker!
The frame's been carefully checked by one of our mechanics to confirm the alignment's correct and there's no damage to the threads. If there are any minor issues worth noting we will do so in the overview section below. Please take a good look at the detailed photos so you can see the cosmetic condition of the frame before you buy.OVERVIEW
SIZING
Size Guide* - N/A
Seat Tube (ctt) - 52.5 cm
(Effective) Top Tube (ctc) - 56 cm
Head Tube - 134 mm
Chainstay Length - 47.5 cm
Wheelbase - 110.5 cm
*This is just a guide, not a guarantee the frame will fit as every rider is different. If you're unsure of your size we'd always recommend trying out a bike with similar frame dimensions first.
TECHNICAL INFO
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay directly to the delivery company before receiving the order. Unfortunately we can’t advise on the exact costs as it varies from country to country, so please check your national rates before purchasing.
Seat Tube (ctc) - we measure from the centre of the bottom bracket shell up to the centre line of the top tube to give a consistent measurement regardless of frame design (ctc means centre to centre).
(Effective) Top Tube (ctc) - this is measured from the centre of the head tube to the centre of the seat tube, along the line where a top tube would be to give you an indication of length.
Chainstay Length - measured from the centre of the bottom bracket shell to the centre point of the rear dropout.
Wheelbase - measured from the centre of the front fork dropout to the centre point of the rear dropout.
Front & Rear Spacing - measured from the inside of one dropout to the other. The dropouts on steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.
Headset Threads - although it's generally recommended to match threaded parts exactly, with headsets you can technically mix and match, unless you have French or the obscure old Raleigh threads, in which case you need to stick to that type.
£295.00
Though branded Specialized this is a refinished Peugeot Triathlon PGN10, built from Reynolds 501 with a neat quill seatpost set-up. Probably from 1986, this model came at a lower price point than the full 531C Triathlon Peugeot also offered, but still had the racy geometry and recessed allen key brakes. The quill seatpost does away with a seat post bolt on the frame itself and results in a very neatly finished frame design.
The frame's been carefully checked by one of our mechanics to confirm the alignment's correct and there's no damage to the threads. If there are any minor issues worth noting we will do so in the overview section below. Please take a good look at the detailed photos so you can see the cosmetic condition of the frame before you buy.OVERVIEW
SIZING
Size Guide* - Small/Medium (Approx 30 1/2" Inside Leg)
Seat Tube (ctc) - 52 cm
Top Tube (ctc) - 53.5 cm
Head Tube - 122 mm
Chainstay Length - 41 cm
Wheelbase - 99 cm
*This is just a guide, not a guarantee the frame will fit as every rider is different. If you're unsure of your size we'd always recommend trying out a bike with similar frame dimensions first.
TECHNICAL INFO
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay directly to the delivery company before receiving the order. Unfortunately we can’t advise on the exact costs as it varies from country to country, so please check your national rates before purchasing.
£295.00
Mercier cycles built frames and full bikes near Lyon in France for 65 years, sponsoring some top riders who wore the iconic purple and yellow jersey ,including Louison Bobet, Cyrille Guimard, Raymond Poulidor and Joop Zoetemelk. Mercier produced a large range from children's bikes to top end racing machines, they were a high volume builder and had a great deal of success during the 'bike boom' years, producing 150,000 bikes in 1975 alone. Their top end bikes are often finished in purple or pink (or somewhere in between!), like the garish colours of the racing team jerseys, Emile Mercier claiming at the time that “It may not be pretty, but at least we stand out in the peloton”.
Though made in large numbers, the Special Tour de France was a nicely made bike and sat near the top of Mercier's large range of bikes. The name celebrates the company's long history of sponsoring professional race teams, having been involved in every edition from 1933 to 1983.
This Mercier Special Tour de France is an early 1970s model, built from Vitus tubes and with a classic purple paint job. Although not cosmetically perfect, the frame will make the basis for a solid L'Eroica restoration or even qualify for use as a reliable daily commuter.
If you're taking part in L'Eroica or a similar vintage event, this frame is of the correct age, so you won't be disqualified for being a rule breaker!
The frame's been carefully checked by one of our mechanics to confirm the alignment's correct and there's no damage to the threads. If there are any minor issues worth noting we will do so in the overview section below. Please take a good look at the detailed photos so you can see the cosmetic condition of the frame before you buy.OVERVIEW
SIZING
Size Guide* - Medium (Approx 32" Inside Leg)
Seat Tube (ctc) - 54 cm
Top Tube (ctc) - 56 cm
Head Tube - 124 mm
Chainstay Length - 44 cm
Wheelbase - 104.5 cm
*This is just a guide, not a guarantee the frame will fit as every rider is different. If you're unsure of your size we'd always recommend trying out a bike with similar frame dimensions first.
TECHNICAL INFO
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay directly to the delivery company before receiving the order. Unfortunately we can’t advise on the exact costs as it varies from country to country, so please check your national rates before purchasing.
£295.00
Peugeot are perhaps the best known mass producers of bicycles and have a long and illustrious history. Cycles Peugeot began producing Penny Farthings in 1886, quickly moving with the technological advancements of the day and becoming one of the world's largest and most successful bike builders through the post war period and bike boom years. With an astonishing 500 models of bike available in the 1970s Peugeot were ubiquitous in Europe and North America, sales were aided by ongoing success with the factory professional team which won an unprecedented 10 Tour de France titles. The company strived to use French built parts on all of its bikes for many years, and there are many brilliant examples of their bikes fully decked out with parts from Stronglight, Simplex and Mavic.
We believe this is a 1961 Peugeot PL-8 in original 'Italian Blue' colour. The paintwork and decals all look orignal and are in pretty good order for a bike over 60 years old. Designed for every day use, the PL-8 had 4 gears at the rear and a double chainset up front with comfortable swept back handlebars, the sort of bike that was once ubiquitous on the streets of any French city. With a neatly designed rear rack, mudguards and integrated dynamo lights included this will make a super town bike, commuter or period porteur bike.
If you're taking part in L'Eroica or a similar vintage event, this frame is of the correct age, so you won't be disqualified for being a rule breaker!
The frame's been carefully checked by one of our mechanics to confirm the alignment's correct and there's no damage to the threads. If there are any minor issues worth noting we will do so in the overview section below. Please take a good look at the detailed photos so you can see the cosmetic condition of the frame before you buy.OVERVIEW
NB - Includes mudguards, rear rack and dynamo lights, weight includes these. For shipping outside of the UK, these parts will need to be disassembled for packing.
SIZING
Size Guide* - Medium (Approx 32 1/2" Inside Leg)
Seat Tube (ctc) - 55.5 cm
Top Tube (ctc) - 57 cm
Head Tube - 118 mm
Chainstay Length - 45.5 cm
Wheelbase - 106 cm
*This is just a guide, not a guarantee the frame will fit as every rider is different. If you're unsure of your size we'd always recommend trying out a bike with similar frame dimensions first.
TECHNICAL INFO
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay directly to the delivery company before receiving the order. Unfortunately we can’t advise on the exact costs as it varies from country to country, so please check your national rates before purchasing.
Seat Tube (ctc) - we measure from the centre of the bottom bracket shell up to the centre line of the top tube to give a consistent measurement regardless of frame design (ctc means centre to centre).
Top Tube (ctc) - this is measured from the centre of the head tube to the centre of the seat tube, along the centre of the top tube.
Chainstay Length - measured from the centre of the bottom bracket shell to the centre point of the rear dropout.
Wheelbase - measured from the centre of the front fork dropout to the centre point of the rear dropout.
Front & Rear Spacing - measured from the inside of one dropout to the other. The dropouts on steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.
Brake Drop - measured using wheels of the relevant size for the frame, as stated in the technical info section.
Headset Threads - although it's generally recommended to match threaded parts exactly, with headsets you can technically mix and match, unless you have French or the obscure old Raleigh threads, in which case you need to stick to that type.
£255.50 £365.00
Peugeot are perhaps the best known mass producers of bicycles and have a long and illustrious history. Cycles Peugeot began producing Penny Farthings in 1886, quickly moving with the technological advancements of the day and becoming one of the world's largest and most successful bike builders through the post war period and bike boom years. With an astonishing 500 models of bike available in the 1970s Peugeot were ubiquitous in Europe and North America, sales were aided by ongoing success with the factory professional team which won an unprecedented 10 Tour de France titles. The company strived to use French built parts on all of its bikes for many years, and there are many brilliant examples of their bikes fully decked out with parts from Stronglight, Simplex and Mavic.
This original 1952 Peugeot PC 40 frameset was built at the height of Peugeot's powers as a bike manufacturer when they were producing nearly a quarter of a million bikes annually. The PC 40 was a lightweight 'Tourisme' model and would have been offered like this and as a dropped top tube 'step-through' version. Designed to be a quality every day bike with mudguards and a few gears operated from a top tube shifter, alongside the comfy and practical 650B wheels this example still has its original paint finish and decals and is ready to be put back into service again.
If you're taking part in L'Eroica or a similar vintage event, this frame is of the correct age, so you won't be disqualified for being a rule breaker!
The frame's been carefully checked by one of our mechanics to confirm the alignment's correct and there's no damage to the threads. If there are any minor issues worth noting we will do so in the overview section below. Please take a good look at the detailed photos so you can see the cosmetic condition of the frame before you buy.OVERVIEW
SIZING
Size Guide* - Medium (Approx 32 1/2" Inside Leg)
Seat Tube (ctc) - 55 cm
Top Tube (ctc) - 57 cm
Head Tube - 170 mm
Chainstay Length - 48 cm
Wheelbase - 109 cm
*This is just a guide, not a guarantee the frame will fit as every rider is different. If you're unsure of your size we'd always recommend trying out a bike with similar frame dimensions first.
TECHNICAL INFO
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay directly to the delivery company before receiving the order. Unfortunately we can’t advise on the exact costs as it varies from country to country, so please check your national rates before purchasing.
Seat Tube (ctc) - we measure from the centre of the bottom bracket shell up to the centre line of the top tube to give a consistent measurement regardless of frame design (ctc means centre to centre).
Top Tube (ctc) - this is measured from the centre of the head tube to the centre of the seat tube, along the centre of the top tube.
Chainstay Length - measured from the centre of the bottom bracket shell to the centre point of the rear dropout.
Wheelbase - measured from the centre of the front fork dropout to the centre point of the rear dropout.
Front & Rear Spacing - measured from the inside of one dropout to the other. The dropouts on steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.
Headset Threads - although it's generally recommended to match threaded parts exactly, with headsets you can technically mix and match, unless you have French or the obscure old Raleigh threads, in which case you need to stick to that type.
£295.00
Peugeot are perhaps the best known mass producers of bicycles and have a long and illustrious history. Cycles Peugeot began producing Penny Farthings in 1886, quickly moving with the technological advancements of the day and becoming one of the world's largest and most successful bike builders through the post war period and bike boom years. With an astonishing 500 models of bike available in the 1970s Peugeot were ubiquitous in Europe and North America, sales were aided by ongoing success with the factory professional team which won an unprecedented 10 Tour de France titles. The company strived to use French built parts on all of its bikes for many years, and there are many brilliant examples of their bikes fully decked out with parts from Stronglight, Simplex and Mavic.
The Puymorens was Peugeot's top of the range steel framed race bike and was used by the pro team in continental classic races. Built from Reynolds 531 'Professionnel' with their neat quill seatpost, the Puymorens was a lightweight race bike designed to go fast.
This mid 80s Puymorens has been refurbished by Argos at some point and carries Argos branding instead of the original Peugeot team logos. We assume that at the same time it was repainted the frame was converted to internal brake cable routing as this model was not available with this specification and there is a faint trace of where the original top tube cable stops would have lived. It is nicely finished in a typical Peugeot grey with chromed dropouts and drive side chainstay and some period brand decals.
If you're taking part in L'Eroica or a similar vintage event, this frame is of the correct age, so you won't be disqualified for being a rule breaker!
The frame's been carefully checked by one of our mechanics to confirm the alignment's correct and there's no damage to the threads. If there are any minor issues worth noting we will do so in the overview section below. Please take a good look at the detailed photos so you can see the cosmetic condition of the frame before you buy.OVERVIEW
SIZING
Size Guide* - Large (Approx 34 1/2" Inside Leg)
Seat Tube (ctc) - 58.5 cm
Top Tube (ctc) - 57.5 cm
Head Tube - 174 mm
Chainstay Length - 41.5 cm
*This is just a guide, not a guarantee the frame will fit as every rider is different. If you're unsure of your size we'd always recommend trying out a bike with similar frame dimensions first.
TECHNICAL INFO
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay directly to the delivery company before receiving the order. Unfortunately we can’t advise on the exact costs as it varies from country to country, so please check your national rates before purchasing.
£365.00
Mavic 500 / 550 wheels built with Mavic GP 4 rims, the hubs hailing from France and in production during the 1970s. Made from aluminium/steel and weighing in at 1.8 kg - incredibly lightweight for a pair of wheels at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.
The wheels have been serviced, excess glue residue removed and graded as excellent condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.OVERVIEW
TECHNICAL INFO
We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.
We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.
We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay directly to the delivery company before receiving the order. Unfortunately we can’t advise on the exact costs as it varies from country to country, so please check your national rates before purchasing.
Rim Size - this should match the size your bike frame is designed to fit. Standard/full size tubulars only come in one wheel size, these are often referred to as 28" or 700c (sometimes even 27"). These are all the same size, the next size down is 26", so any rims larger than 26" will be standard/full size tubulars.
Bike Type - this is really just a guide, as technically any wheels can be used on any bike as long as everything's compatible. Within reason of course - we wouldn't recommend riding a set of skinny tubular road wheels down a mountain!
Drilling (F/R) - the number of spokes in each wheel (front/rear).
Spacing (O.L.D.) (F/R) - the width of the hubs measured at their widest point, from the outside of the locking end nuts (O.L.D. = Over Locknut Dimension), not including the hub axle. These measurements need to match the inside of your frame and fork’s dropouts. Steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.
Speed - the number of cogs the rear hub was designed to be used with.
Sprocket Fitting - for cassette hubs this refers to the spline pattern (the shape of the cogs where they slide on to the hub) and this must match the cassette you intend to use. With freewheel hubs it refers to the thread, ISO is the modern standard and is almost exactly the same as older English/British and Italian thread, allowing you to mix and match between these thread types as long as it's not going to be under extreme force, in which case it's best to stick to an exact match. Freewheel hubs with a French thread must be used with a French threaded freewheel.
SUBSCRIBE TO GET THE FIRST SCOOP
Exclusive content, new products, subscriber only promotions. Delivered to your inbox by tiny cyclists, every few weeks.
Don't worry, you can unsubscribe at any time.
PEDAL PEDLAR
T: 02036758003 // E: info@pedalpedlar.co.uk
OPEN BY APPOINTMENT
If you’d like to visit us please email first to arrange an appointment. We’re normally around on Tuesday, Wednesday & Thursday, but this is subject to change at short notice.
© 2024 Pedal Pedlar.
Ecommerce Software by Shopify