£12.00
Classic steel seatpost in the traditional 'bullet nose' style, as found on vintage bikes from the 1940s, 50s, 60s etc. In very good condition, with a few marks as seen in the photos.
Diameter: 25.4mm |
Total Length: 160mm |
UK: £4.50 |
Europe: £8.50 |
Rest of World: £13.25 |
SHIPPING, TAXES & RETURNS
£10.00
Classic steel seatpost in the traditional 'bullet nose' style, as found on vintage bikes from the 1940s, 50s, 60s etc. In good condition, with some marks as seen in the photos , but still very presenteable.
Diameter: 25.4mm |
Total Length: 180mm |
UK: £4.50 |
Europe: £8.50 |
Rest of World: £13.25 |
SHIPPING, TAXES & RETURNS
£495.00
We offer a full custom build service, so if you need a any of our frames building up into your perfect bike, just give us a shout.
We also carry a wide range of headsets & bottom brackets, and provide a fitting service if you require this.
SIZING & SPEC: | |
Seat Tube (ctc): | 51 cm (ctc) |
Top Tube (ctc): | 53 cm (ctc) |
Weight: | 2.375 kg |
Tubing: | Columbus w) Grooved Seat Tube for Short Wheelbase |
Rear Spacing: | 126 mm |
Seatpost Diameter: | 26.4 mm |
Brake Fixings: | Recessed Allen Key |
Dropouts: | Columbus |
Bottom Bracket Thread: | French |
Headset Thread: | Italian |
Era: | 1980s |
SHIPPING, TAXES & RETURNS
£15.00
Pre-washed vintage cycling jersey from days gone by.
All jerseys are sized to be a snug but not super-tight fit. We've also provided actual measurements of the garment when laid flat so you can compare against your favourite fitting jersey. Please make sure the length is long enough, as these are sized using the chest measurement, and sometimes mis-shaping can happen over the years.
The chest is measured across the front, from armpit to armpit at the seam. The length is measured down the back, from top of collar to bottom of hem.
Size: |
Small (34 - 37" Chest)
|
|
Material: | 100% Polyester | |
Condition: |
Very Good
|
|
SKU: | J216 | |
Cm | Inches | |
Pit to Pit (Laid Flat): | 41 | 16.0 |
Length (Down Back): | 69 | 27.0 |
*Our model wears a size medium and is 182cm / 6" tall.
SHIPPING, TAXES & RETURNS
£15.00
Condition: | NOS-New Old Stock (Shop Related Storage Marks) |
Material: | Plastic |
Fit: | Peg |
Type: | Schraeder |
Compressed Length: | 39cm |
Uncompressed Length: | 40.4cm |
SHIPPING, TAXES & RETURNS
£25.00
Condition: | Good |
Material: | Alloy |
Fit: | Peg |
Type: | Schraeder |
Compressed Length: | 38.5cm |
Uncompressed Length: | 41cm |
SHIPPING, TAXES & RETURNS
£15.00
Condition: | Good |
Material: | Plastic |
Fit: | Frame |
Type: | Presta |
Compressed Length: | 52.5cm |
Uncompressed Length: | 54.5cm |
SHIPPING, TAXES & RETURNS
£8.00
Condition: | Good but with Slight Bend |
Material: | Plastic |
Fit: | Peg |
Type: | Schraeder/Presta |
Compressed Length: | 38cm |
Uncompressed Length: | 40cm |
SHIPPING, TAXES & RETURNS
£12.00
Condition: | Ok - Some Paint Flaking |
Material: | Steel |
Fit: | Peg |
Type: | Presta / Schraeder |
Compressed Length: | 40.5cm |
Uncompressed Length: | 42cm |
SHIPPING, TAXES & RETURNS
£15.00
TECHNICAL INFO & CONDITION
Threading: | Standard ISO (9/16" x 20 TPI) |
Bearing / Race Condition: | Good |
Body Condition: | Good |
SHIPPING, TAXES & RETURNS
£30.00
Please refer to the table below & the detailed photos for technical info & condition.
If you need help determining the technical bits, such as headset threading or crown race diameter, Sheldon Brown has a very useful crib sheet here.
TECHNICAL INFO & CONDITION
Stack Height: | 41mm |
Threading: | Standard ISO (24 tpi - British/Italian/JIS) |
Crown Race: | 26.4mm (Standard ISO) |
Cosmetic Condition: | Good |
Bearing/Surface Condition: | Very Good |
SHIPPING, TAXES & RETURNS
£20.00
TECHNICAL INFO & CONDITION
Threading: | British ISO |
Bearing / Race Condition: | Good |
Body Condition: | Good |
SHIPPING, TAXES & RETURNS
£35.00
Non-Aero cable routing allows the cables to come out of the top of the brake levers, aero routing sends the cables under the handlebar tape.
Most drop bar brake levers will have a clamp size of between 23.8 - 24.2mm and will fit most drop handlebars, the exception generally being older British & French handlebars that sometimes require a 22.2mm clamp size.
Flat bars (such as Risers, French Porteur bars, Moustache bars etc) will require the correct clamp size to match (usually either 22.2mm or 23.8mm).
Please check the photos & table below for sizings & condition.
TECHNICAL INFO & CONDITION
Cable Routing: | Non-Aero |
Clamp Size: | 23.8mm |
Body Condition: | Good |
SHIPPING, TAXES & RETURNS
£15.00
TECHNICAL INFO & CONDITION
Threading: | Standard ISO (9/16" x 20 TPI) |
Bearing / Race Condition: | OK |
Body Condition: | Good |
SHIPPING, TAXES & RETURNS
Sign-up for stock updates & exclusive offers...
PEDAL PEDLAR
106 Balls Pond Road
Islington, London N1 4AG
T: 02036758003 // E: info@pedalpedlar.co.uk
OPENING HOURS:
We're sorry to say the shop is currently closed to visitors. We'll be continuing to work behind the scenes, fulfilling online orders as usual but we’re not taking in any bikes for repairs.
Our post collection days are currently Tuesdays & Thursdays, so please bear this in mind when placing orders as it may take a little longer for your order to arrive.
We'd like to take this opportunity to thank you once again for your support during these difficult times. We'll update this information as soon as the doors are open again.
© 2021 Pedal Pedlar.
Ecommerce Software by Shopify