Latest Arrivals...

Strongy Small Flange Vintage 36h Rear Hub

£18.75 £25.00

✓ Original hub - in production from the 1970s to the 1980s
✓ Super lightweight for the era - only 224 grams!
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked, cleaned & serviced
✓ Worldwide shipping

Strongy rear hub, hailing from France and in production from the 1970s to the 1980s. Made from aluminium/steel and weighing in at 224 grams - incredibly lightweight for a rear hub at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong hub!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Spoke Drilling - the number of holes for the spokes, your wheel rim needs to match the hub exactly.

Spacing (O.L.D.) - the width of the hub measured at its widest point, from the outside of the locking end nuts (O.L.D. = Over Locknut Dimension), not including the hub axle. This measurement needs to match the inside of your frame's dropouts. Steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.

Speed - the number of cogs the hub was designed to be used with.

Sprocket Fitting - for cassette hubs this refers to the spline pattern (the shape of the cogs where they slide on to the hub) and this must match the cassette you intend to use. With freewheel hubs it refers to the thread, ISO is the modern standard and is almost exactly the same as older English/British and Italian thread, allowing you to mix and match between these thread types as long as it's not going to be under extreme force, in which case it's best to stick to an exact match. Freewheel hubs with a French thread must be used with a French threaded freewheel.

Campagnolo Nuovo/Super Record (1034/P) Small Flange c.1976 Vintage 36h Rear Hub

£71.25 £95.00

✓ Original hub - in production from the 1960s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked, cleaned & serviced
✓ Worldwide shipping

Campagnolo Nuovo/Super Record rear hub, hailing from Italy and dating back to 1976. The skewer design is of the ’pre-CPSC’ era produced until around 1978. Made from aluminium/steel and weighing in at 291 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong hub!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Spoke Drilling - the number of holes for the spokes, your wheel rim needs to match the hub exactly.

Spacing (O.L.D.) - the width of the hub measured at its widest point, from the outside of the locking end nuts (O.L.D. = Over Locknut Dimension), not including the hub axle. This measurement needs to match the inside of your frame's dropouts. Steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.

Speed - the number of cogs the hub was designed to be used with.

Sprocket Fitting - for cassette hubs this refers to the spline pattern (the shape of the cogs where they slide on to the hub) and this must match the cassette you intend to use. With freewheel hubs it refers to the thread, ISO is the modern standard and is almost exactly the same as older English/British and Italian thread, allowing you to mix and match between these thread types as long as it's not going to be under extreme force, in which case it's best to stick to an exact match. Freewheel hubs with a French thread must be used with a French threaded freewheel.

Sport Energy Large Flange Classic 18h Rear Hub

£48.75 £65.00

✓ Original hub - in production from the 1990s to the 2000s
✓ Professionally checked, cleaned & serviced
✓ Worldwide shipping

Sport Energy rear hub, in production from the 1990s to the 2000s. Made from aluminium/steel and weighing in at 366 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Spoke Drilling - the number of holes for the spokes, your wheel rim needs to match the hub exactly.

Spacing (O.L.D.) - the width of the hub measured at its widest point, from the outside of the locking end nuts (O.L.D. = Over Locknut Dimension), not including the hub axle. This measurement needs to match the inside of your frame's dropouts. Steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.

Speed - the number of cogs the hub was designed to be used with.

Sprocket Fitting - for cassette hubs this refers to the spline pattern (the shape of the cogs where they slide on to the hub) and this must match the cassette you intend to use. With freewheel hubs it refers to the thread, ISO is the modern standard and is almost exactly the same as older English/British and Italian thread, allowing you to mix and match between these thread types as long as it's not going to be under extreme force, in which case it's best to stick to an exact match. Freewheel hubs with a French thread must be used with a French threaded freewheel.

Campagnolo Gran Sport (1006/2) Small Flange Early Version 'Open C' Vintage 36h Rear Hub

£123.75 £165.00

✓ Original hub - produced in the 1950s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked, cleaned & serviced
✓ Worldwide shipping

Campagnolo Gran Sport rear hub, hailing from Italy and in production during the 1950s. Made from aluminium/steel and weighing in at 311 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong hub!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Spoke Drilling - the number of holes for the spokes, your wheel rim needs to match the hub exactly.

Spacing (O.L.D.) - the width of the hub measured at its widest point, from the outside of the locking end nuts (O.L.D. = Over Locknut Dimension), not including the hub axle. This measurement needs to match the inside of your frame's dropouts. Steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.

Speed - the number of cogs the hub was designed to be used with.

Sprocket Fitting - for cassette hubs this refers to the spline pattern (the shape of the cogs where they slide on to the hub) and this must match the cassette you intend to use. With freewheel hubs it refers to the thread, ISO is the modern standard and is almost exactly the same as older English/British and Italian thread, allowing you to mix and match between these thread types as long as it's not going to be under extreme force, in which case it's best to stick to an exact match. Freewheel hubs with a French thread must be used with a French threaded freewheel.

Miche Primato Pistard Small Flange Pista NOS/NIB Classic 32/32h Track Hubs

£82.50 £110.00

✓ Original hubs - in production from the 1990s to the 2000s
✓ New old stock & still in the original packaging!
✓ Lightweight for the era - just 525 grams
✓ Worldwide shipping

Miche Primato Pistard hubs, hailing from Italy and in production from the 1990s to the 2000s (yet still new & unused after all this time!). Made from aluminium/steel and weighing in at 525 grams - pretty lightweight for a pair of hubs at that time. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Spoke Drilling - the number of holes for the spokes (front/rear), your wheel rims need to match the hubs exactly.

Sprocket Type - fixed gear sprockets need a lockring to secure them so require an extra threaded part that has a slight step down from the main sprocket thread, some rear hubs have this on both sides to allow you to fit different size sprockets on the same wheel (double fixed). If the rear hub doesn’t have these then it's only suitable for a singlespeed freewheel, not fixed gear. Some hubs allow both fixed and singlespeed use, these are commonly referred to as 'Flip Flop' hubs.

Lockring Thread - the sprocket threads are the same on all track hubs, but the outer (reverse) threads for the lockring can be different. The thread types are not interchangeable so must match.

Spacing (O.L.D.) - the width of the hubs measured at their widest point, from the outside of the locking end nuts (O.L.D. = Over Locknut Dimension), not including the hub axle. These measurements need to match the inside of your frame and fork’s dropouts. Steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.

Shimano 105 (HB-1050 / FH-1050) NOS Vintage 32/32h Hubs

£97.75 £115.00

✓ Original hubs - produced in the 1980s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Shimano 105 hubs, hailing from Japan and in production during the 1980s (yet still new & unused after all this time!). Made from aluminium/steel and weighing in at 636 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Spoke Drilling - the number of holes for the spokes (front/rear), your wheel rims need to match the hubs exactly.

Spacing (O.L.D.) - the width of the hubs measured at their widest point, from the outside of the locking end nuts (O.L.D. = Over Locknut Dimension), not including the hub axle. These measurements need to match the inside of your frame and fork’s dropouts. Steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.

Speed - the number of cogs the rear hub was designed to be used with.

Sprocket Fitting - for cassette hubs this refers to the spline pattern (the shape of the cogs where they slide on to the hub) and this must match the cassette you intend to use. With freewheel hubs it refers to the thread, ISO is the modern standard and is almost exactly the same as older English/British and Italian thread, allowing you to mix and match between these thread types as long as it's not going to be under extreme force, in which case it's best to stick to an exact match. Freewheel hubs with a French thread must be used with a French threaded freewheel.

Campagnolo Gran Sport (1006/A) Small Flange Early Version Vintage 36/36h Hubs

£198.75 £265.00

✓ Original hubs - in production from the 1950s to the 1960s
✓ Lightweight for the era - just 536 grams
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked, cleaned & serviced
✓ Worldwide shipping

Campagnolo Gran Sport hubs, hailing from Italy and in production from the 1950s to the 1960s. Made from steel/aluminium and weighing in at 536 grams - pretty lightweight for a pair of hubs at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, these are fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong hubs!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Spoke Drilling - the number of holes for the spokes (front/rear), your wheel rims need to match the hubs exactly.

Spacing (O.L.D.) - the width of the hubs measured at their widest point, from the outside of the locking end nuts (O.L.D. = Over Locknut Dimension), not including the hub axle. These measurements need to match the inside of your frame and fork’s dropouts. Steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.

Speed - the number of cogs the rear hub was designed to be used with.

Sprocket Fitting - for cassette hubs this refers to the spline pattern (the shape of the cogs where they slide on to the hub) and this must match the cassette you intend to use. With freewheel hubs it refers to the thread, ISO is the modern standard and is almost exactly the same as older English/British and Italian thread, allowing you to mix and match between these thread types as long as it's not going to be under extreme force, in which case it's best to stick to an exact match. Freewheel hubs with a French thread must be used with a French threaded freewheel.

Campagnolo Nuovo/Super Record (754/755) 'Patent' Later Type Vintage Chainring Bolts Set

£29.75 £35.00

✓ Original parts - in production from the 1960s to the 1970s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Campagnolo Nuovo/Super Record chainring bolts, hailing from Italy and in production from the 1960s to the 1970s. Made from steel and weighing in at 24 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong chainring bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Chainring Count - the number of chainrings the bolts are designed to fit, this must be the same as the number of chainrings you are using.

Crank Type - Most cranks require the standard 5-bolt sets that consist of 5 bolts with backs that slot into the rear of the crank spider, there are also some less common cranks with 3 arms that require the 3-arm chainring bolts. Specialites T.A. 'Professionel 5 Vis' and Stronglight '49D' type cranks require special 50.4 BCD chainring bolts that are specific to these crank designs.

Mount Type - most bolts simply fix the chainring to the crank, but some cranks require bolts to fix one chainring to another.

Back Nut Length (Excluding Head) - the more chainrings your crank has the longer the bolts and nuts need to be. We exclude the head part from the measurement (the bit that often sits recessed in back of the chainring).

Unbranded Vintage 25-29 mm Seatpost Binder Bolt

£7.23 £9.00

✓ Original part - in production from the 1970s to the 1990s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Unbranded vintage seatpost binder bolt, most likely in production from the 1970s to the 1990s. Made from steel and weighing in at 14 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong seatpost binder bolt!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Clamp Opening - the minimum and maximum distance between the inside of the nut and bolt heads. The minimum is measured with the bolt tightened as much as possible (for hex head types this may mean the bolt end will stick quite far out of the nut). For the maximum opening we ensure 5-6 mm of thread remainis in the nut for a secure fixing.

Outer Diameter - the part that goes through the frame, most steel frames will take an 8 mm bolt whereas early lugged aluminium frames often have a larger hole that takes a 10 mm bolt diameter.

Bolt Fixing Type - Some binder bolts have knurled parts that grip the inside of the bolt hole, some have a small notch locator (a "key" that lines up with a cut-out in the frame if yours has one), others have tightening mechanism on both the nut and bolt to secure the seatpost in the frame.

Ofmega Vintage 20-23 mm Seatpost Binder Bolt

£12.75 £15.00

✓ Original part - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Ofmega seatpost binder bolt, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 10 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong seatpost binder bolt!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Clamp Opening - the minimum and maximum distance between the inside of the nut and bolt heads. The minimum is measured with the bolt tightened as much as possible (for hex head types this may mean the bolt end will stick quite far out of the nut). For the maximum opening we ensure 5-6 mm of thread remainis in the nut for a secure fixing.

Outer Diameter - the part that goes through the frame, most steel frames will take an 8 mm bolt whereas early lugged aluminium frames often have a larger hole that takes a 10 mm bolt diameter.

Bolt Fixing Type - Some binder bolts have knurled parts that grip the inside of the bolt hole, some have a small notch locator (a "key" that lines up with a cut-out in the frame if yours has one), others have tightening mechanism on both the nut and bolt to secure the seatpost in the frame.

Cobra Vintage 20-23 mm Seatpost Binder Bolt

£12.75 £15.00

✓ Original part - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Cobra seatpost binder bolt, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 9 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong seatpost binder bolt!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Clamp Opening - the minimum and maximum distance between the inside of the nut and bolt heads. The minimum is measured with the bolt tightened as much as possible (for hex head types this may mean the bolt end will stick quite far out of the nut). For the maximum opening we ensure 5-6 mm of thread remainis in the nut for a secure fixing.

Outer Diameter - the part that goes through the frame, most steel frames will take an 8 mm bolt whereas early lugged aluminium frames often have a larger hole that takes a 10 mm bolt diameter.

Bolt Fixing Type - Some binder bolts have knurled parts that grip the inside of the bolt hole, some have a small notch locator (a "key" that lines up with a cut-out in the frame if yours has one), others have tightening mechanism on both the nut and bolt to secure the seatpost in the frame.

Unbranded Vintage 12-23 mm Hex Head Seatpost Binder Bolt

£12.75 £15.00

✓ Original part - in production from the 1960s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Unbranded vintage seatpost binder bolt, most likely in production from the 1960s to the 1980s. Made from steel and weighing in at 21 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong seatpost binder bolt!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Clamp Opening - the minimum and maximum distance between the inside of the nut and bolt heads. The minimum is measured with the bolt tightened as much as possible (for hex head types this may mean the bolt end will stick quite far out of the nut). For the maximum opening we ensure 5-6 mm of thread remainis in the nut for a secure fixing.

Outer Diameter - the part that goes through the frame, most steel frames will take an 8 mm bolt whereas early lugged aluminium frames often have a larger hole that takes a 10 mm bolt diameter.

Bolt Fixing Type - Some binder bolts have knurled parts that grip the inside of the bolt hole, some have a small notch locator (a "key" that lines up with a cut-out in the frame if yours has one), others have tightening mechanism on both the nut and bolt to secure the seatpost in the frame.

Raleigh Vintage 15-20 mm Hex Head Seatpost Binder Bolt

£29.75 £35.00

✓ Original part - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Raleigh seatpost binder bolt, hailing from Great Britain and in production from the 1970s to the 1980s. Made from steel and weighing in at 19 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong seatpost binder bolt!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Clamp Opening - the minimum and maximum distance between the inside of the nut and bolt heads. The minimum is measured with the bolt tightened as much as possible (for hex head types this may mean the bolt end will stick quite far out of the nut). For the maximum opening we ensure 5-6 mm of thread remainis in the nut for a secure fixing.

Outer Diameter - the part that goes through the frame, most steel frames will take an 8 mm bolt whereas early lugged aluminium frames often have a larger hole that takes a 10 mm bolt diameter.

Bolt Fixing Type - Some binder bolts have knurled parts that grip the inside of the bolt hole, some have a small notch locator (a "key" that lines up with a cut-out in the frame if yours has one), others have tightening mechanism on both the nut and bolt to secure the seatpost in the frame.

Time MID 57 w) Cleats NOS/NIB Classic Clipless Pedals

£48.75 £65.00

✓ Original pedals - produced in the 1990s
✓ New old stock & still in the original packaging!
✓ Lightweight for the era - just 390 grams
✓ Worldwide shipping

Time MID 57 pedals, hailing from France and in production during the 1990s (yet still new & unused after all this time!). Made from plastic/steel and weighing in at 390 grams - pretty lightweight for clipless pedals at that time. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cleat System - the cleat the pedals were designed to fit. The brand of cleats doesn't have to match, as long as they were designed for the same system.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

LOOK ARC 226 Classic Clipless Pedals

£30.00 £40.00

✓ Original pedals - produced in the 1990s
✓ Professionally checked & cleaned
✓ Worldwide shipping

LOOK ARC 226 pedals, hailing from France and in production during the 1990s. Made from aluminium/steel and weighing in at 432 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cleat System - the cleat the pedals were designed to fit. The brand of cleats doesn't have to match, as long as they were designed for the same system.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Time Criterium Classic Clipless Pedals

£41.25 £55.00

✓ Original pedals - produced in the 1990s
✓ Professionally checked & cleaned
✓ Worldwide shipping

Time Criterium pedals, hailing from France and in production during the 1990s. Made from aluminium/steel and weighing in at 479 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cleat System - the cleat the pedals were designed to fit. The brand of cleats doesn't have to match, as long as they were designed for the same system.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Eddy Merckx Podio Classic Clipless Pedals

£41.25 £55.00

✓ Original pedals - produced in the 1990s
✓ Professionally checked & cleaned
✓ Worldwide shipping

Eddy Merckx Podio pedals, hailing from Belgium and in production during the 1990s. Made from aluminium/steel and weighing in at 448 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Cleat System - the cleat the pedals were designed to fit. The brand of cleats doesn't have to match, as long as they were designed for the same system.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Shimano PD-A200 Vintage MTB / BMX Pedals

£37.50 £50.00

✓ Original pedals - produced in the 1980s
✓ Professionally checked & cleaned
✓ Worldwide shipping

Shimano PD-A200 pedals, hailing from Japan and in production during the 1980s. Made from aluminium/plastic/steel and weighing in at 525 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Pedal Type - this is just a guide to give you an idea of the pedal type, but any pedal can technically be used for any purpose. Track pedals are designed without the pointed 'quill' for safety though, so it's best to only use track pedals for this purpose. Most track pedals, along with quill & aero road pedals are designed to be used with toe clips & straps for best performance.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Shimano Light Action (PD-A550) NOS/NIB Classic Aero Road Pedals

£48.75 £65.00

✓ Original pedals - produced in the 1990s
✓ New old stock & still in the original packaging!
✓ Lightweight for the era - just 339 grams
✓ Worldwide shipping

Shimano Light Action pedals, hailing from Japan and in production during the 1990s (yet still new & unused after all this time!). Made from steel/aluminium and weighing in at 339 grams - pretty lightweight for pedals at that time. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Pedal Type - this is just a guide to give you an idea of the pedal type, but any pedal can technically be used for any purpose. Track pedals are designed without the pointed 'quill' for safety though, so it's best to only use track pedals for this purpose. Most track pedals, along with quill & aero road pedals are designed to be used with toe clips & straps for best performance.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Shimano Light Action (PD-A550) w) Toe Clip Plates NOS/NIB Classic Aero Road Pedals

£56.25 £75.00

✓ Original pedals - produced in the 1990s
✓ New old stock & still in the original packaging!
✓ Lightweight for the era - just 373 grams
✓ Worldwide shipping

Shimano Light Action pedals, hailing from Japan and in production during the 1990s (yet still new & unused after all this time!). Made from steel/aluminium and weighing in at 373 grams - pretty lightweight for pedals at that time. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Pedal Type - this is just a guide to give you an idea of the pedal type, but any pedal can technically be used for any purpose. Track pedals are designed without the pointed 'quill' for safety though, so it's best to only use track pedals for this purpose. Most track pedals, along with quill & aero road pedals are designed to be used with toe clips & straps for best performance.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Campagnolo Record Pista Superleggari / SL (1038/A) Vintage Track Pedals

£138.75 £185.00

✓ Original pedals - in production from the 1970s to the 1980s
✓ Super lightweight for the era - only 310 grams!
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Campagnolo Record Pista Superleggari / SL pedals, hailing from Italy and in production from the 1970s to the 1980s. Made from aluminium/steel and weighing in at 310 grams - incredibly lightweight for pedals at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong pedals!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Pedal Type - this is just a guide to give you an idea of the pedal type, but any pedal can technically be used for any purpose. Track pedals are designed without the pointed 'quill' for safety though, so it's best to only use track pedals for this purpose. Most track pedals, along with quill & aero road pedals are designed to be used with toe clips & straps for best performance.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Campagnolo 50th Anniversary c.1983 Vintage Quill Road Pedals

£318.75 £425.00

✓ Original pedals - produced in the 1980s
✓ Super lightweight for the era - only 269 grams!
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Campagnolo 50th Anniversary pedals, hailing from Italy and dating back to 1983. Made from aluminium/titanium/steel and weighing in at 269 grams - incredibly lightweight for pedals at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong pedals!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Pedal Type - this is just a guide to give you an idea of the pedal type, but any pedal can technically be used for any purpose. Track pedals are designed without the pointed 'quill' for safety though, so it's best to only use track pedals for this purpose. Most track pedals, along with quill & aero road pedals are designed to be used with toe clips & straps for best performance.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Cyclo Gear Co Ace Vintage Platform Road Pedals

£183.75 £245.00

✓ Original pedals - in production from the 1940s to the 1950s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Cyclo Gear Co Ace pedals, hailing from Great Britain and in production from the 1940s to the 1950s. Made from steel and weighing in at 459 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong pedals!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Pedal Type - this is just a guide to give you an idea of the pedal type, but any pedal can technically be used for any purpose. Track pedals are designed without the pointed 'quill' for safety though, so it's best to only use track pedals for this purpose. Most track pedals, along with quill & aero road pedals are designed to be used with toe clips & straps for best performance.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Campagnolo Record Strada (1037) 2nd Gen Vintage Quill Road Pedals

£93.75 £125.00

✓ Original pedals - in production from the 1960s to the 1970s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Campagnolo Record Strada pedals, hailing from Italy and in production from the 1960s to the 1970s. Made from steel and weighing in at 424 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong pedals!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Pedal Type - this is just a guide to give you an idea of the pedal type, but any pedal can technically be used for any purpose. Track pedals are designed without the pointed 'quill' for safety though, so it's best to only use track pedals for this purpose. Most track pedals, along with quill & aero road pedals are designed to be used with toe clips & straps for best performance.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Campagnolo Record Strada (1037) 2nd Gen Vintage Quill Road Pedals

£108.75 £145.00

✓ Original pedals - in production from the 1960s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Campagnolo Record Strada pedals, hailing from Italy and in production from the 1960s to the 1980s. Made from aluminium/steel and weighing in at 430 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong pedals!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Pedal Type - this is just a guide to give you an idea of the pedal type, but any pedal can technically be used for any purpose. Track pedals are designed without the pointed 'quill' for safety though, so it's best to only use track pedals for this purpose. Most track pedals, along with quill & aero road pedals are designed to be used with toe clips & straps for best performance.

Pedal Threads - this must match the thread on your cranks. Sometimes it's stamped on the end of the crank arm, but most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

Ofmega Vintage Crank Bolts

£12.75 £15.00

✓ Original parts - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Ofmega crank bolts, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 30 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Campagnolo Nuovo/Super Record / Gran Sport (748) Later Type Black Vintage Crank Bolts

£17.00 £20.00

✓ Original parts - in production from the 1960s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Campagnolo Nuovo/Super Record / Gran Sport crank bolts, hailing from Italy and in production from the 1960s to the 1980s. Made from steel and weighing in at 32 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Campagnolo Nuovo/Super/C-Record / Chorus / Euclid (748) Silver Vintage Crank Bolts

£17.00 £20.00

✓ Original parts - in production from the 1970s to the 1990s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Campagnolo Nuovo/Super/C-Record / Chorus / Euclid crank bolts, hailing from Italy and in production from the 1970s to the 1990s. Made from steel and weighing in at 32 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Gipiemme Vintage Crank Bolts

£17.00 £20.00

✓ Original parts - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Gipiemme crank bolts, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 33 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Campagnolo Nuovo/Super/C-Record / Chorus / Euclid (748) Silver Vintage Crank Bolts

£17.00 £20.00

✓ Original parts - in production from the 1970s to the 1990s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Campagnolo Nuovo/Super/C-Record / Chorus / Euclid crank bolts, hailing from Italy and in production from the 1970s to the 1990s. Made from steel and weighing in at 33 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Campagnolo Record (748) Early Type Black Vintage Crank Bolts

£25.50 £30.00

✓ Original parts - in production from the 1950s to the 1960s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Campagnolo Record crank bolts, hailing from Italy and in production from the 1950s to the 1960s. Made from steel and weighing in at 34 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Campagnolo Record / Chorus / Veloce (FC-RA002 / FC-RA004) Classic Crank Bolts

£21.25 £25.00

✓ Original parts - produced in the 1990s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Campagnolo Record / Chorus / Veloce crank bolts, hailing from Italy and in production during the 1990s. Made from steel/plastic and weighing in at 30 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Campagnolo Record (748) Early Type Black Vintage Crank Bolts

£25.50 £30.00

✓ Original parts - in production from the 1950s to the 1960s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Campagnolo Record crank bolts, hailing from Italy and in production from the 1950s to the 1960s. Made from steel and weighing in at 31 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Campagnolo Nuovo/Super Record / Gran Sport (748) Later Type Black Vintage Crank Bolts

£17.00 £20.00

✓ Original parts - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Campagnolo Nuovo/Super Record / Gran Sport crank bolts, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 28 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Campagnolo Record / Chorus / Athena (FC-RE104) Classic Crank Bolts

£19.13 £23.00

✓ Original parts - in production from the 1990s to the 2000s
✓ Checked & cleaned
✓ Worldwide shipping

Campagnolo Record / Chorus / Athena crank bolts, hailing from Italy and in production from the 1990s to the 2000s. Made from steel and weighing in at 32 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Suntour Vintage Crank Bolts

£21.25 £25.00

✓ Original parts - in production from the 1980s to the 1990s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Suntour crank bolts, hailing from Japan and in production from the 1980s to the 1990s. Made from steel and weighing in at 24 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Suntour NOS Vintage Crank Bolts

£34.00 £40.00

✓ Original parts - in production from the 1980s to the 1990s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Suntour crank bolts, hailing from Japan and in production from the 1980s to the 1990s (yet still new & unused after all this time!). Made from steel and weighing in at 31 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Sugino Vintage Crank Bolts

£14.88 £18.00

✓ Original parts - in production from the 1980s to the 1990s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Sugino crank bolts, hailing from Japan and in production from the 1980s to the 1990s. Made from steel and weighing in at 25 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Raleigh Upgrade Technology Titanium NOS Classic Crank Bolts

£34.00 £40.00

✓ Original parts - produced in the 1990s
✓ New old stock! Still unused after all these years
✓ Worldwide shipping

Raleigh Upgrade Technology crank bolts, hailing from Great Britain and in production during the 1990s (yet still new & unused after all this time!). Made from titanium and weighing in at 14 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Unbranded Gold Classic Crank Bolts

£17.00 £20.00

✓ Original parts - produced in the 1990s
✓ Checked & cleaned
✓ Worldwide shipping

Unbranded classic crank bolts, most likely in production during the 1990s. Made from aluminium and weighing in at 11 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Gipiemme Vintage Crank Bolts

£17.00 £20.00

✓ Original parts - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Gipiemme crank bolts, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 27 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Gipiemme Vintage Crank Bolts

£17.00 £20.00

✓ Original parts - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Checked & cleaned
✓ Worldwide shipping

Gipiemme crank bolts, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 24 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong crank bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Sugino Autex 4 NOS/NIB Classic Crank Bolts

£29.75 £35.00

✓ Original parts - produced in the 2000s
✓ New old stock & still in the original packaging!
✓ Worldwide shipping

Sugino Autex 4 crank bolts, hailing from Japan and in production during the 2000s. Made from aluminium/plastic and weighing in at 27 grams. A fine choice for keeping your classic bike authentic, but also great for any other compatible bike too.

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Crank Bolt Type - 15 mm hex bolts used to be standard but some older TA, Stronglight and Zeus cranks used a larger 16 mm bolt, plus a few Japanese makers used a smaller 14 mm hex head. Allen key types were introduced in the 1980s and some are self-extracting, which means the crank removes itself when you undo the bolts.

Crank Bolt Thread - All square taper bottom brackets have a standard M8 x 1 mm thread, the only different thread types you’ll find on crank bolts are the much larger M12 & M15 bolts that are specifically for Octalink and ISIS bottom brackets.

Campagnolo Nuovo/Super Record (754/755) 'Patent' Later Type Vintage Chainring Bolts Set

£38.25 £45.00

✓ Original parts - in production from the 1960s to the 1970s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Campagnolo Nuovo/Super Record chainring bolts, hailing from Italy and in production from the 1960s to the 1970s. Made from steel and weighing in at 24 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong chainring bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Chainring Count - the number of chainrings the bolts are designed to fit, this must be the same as the number of chainrings you are using.

Crank Type - Most cranks require the standard 5-bolt sets that consist of 5 bolts with backs that slot into the rear of the crank spider, there are also some less common cranks with 3 arms that require the 3-arm chainring bolts. Specialites T.A. 'Professionel 5 Vis' and Stronglight '49D' type cranks require special 50.4 BCD chainring bolts that are specific to these crank designs.

Mount Type - most bolts simply fix the chainring to the crank, but some cranks require bolts to fix one chainring to another.

Back Nut Length (Excluding Head) - the more chainrings your crank has the longer the bolts and nuts need to be. We exclude the head part from the measurement (the bit that often sits recessed in back of the chainring).

Ofmega Vintage Chainring Bolts Set

£21.25 £25.00

✓ Original parts - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Ofmega chainring bolts, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 25 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong chainring bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Chainring Count - the number of chainrings the bolts are designed to fit, this must be the same as the number of chainrings you are using.

Crank Type - Most cranks require the standard 5-bolt sets that consist of 5 bolts with backs that slot into the rear of the crank spider, there are also some less common cranks with 3 arms that require the 3-arm chainring bolts. Specialites T.A. 'Professionel 5 Vis' and Stronglight '49D' type cranks require special 50.4 BCD chainring bolts that are specific to these crank designs.

Mount Type - most bolts simply fix the chainring to the crank, but some cranks require bolts to fix one chainring to another.

Back Nut Length (Excluding Head) - the more chainrings your crank has the longer the bolts and nuts need to be. We exclude the head part from the measurement (the bit that often sits recessed in back of the chainring).

Sakae/Ringyo (SR) Vintage Triple Chainring Bolts Set

£21.25 £25.00

✓ Original parts - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Sakae/Ringyo (SR) chainring bolts, hailing from Japan and in production from the 1970s to the 1980s. Made from steel and weighing in at 36 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong chainring bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Chainring Count - the number of chainrings the bolts are designed to fit, this must be the same as the number of chainrings you are using.

Crank Type - Most cranks require the standard 5-bolt sets that consist of 5 bolts with backs that slot into the rear of the crank spider, there are also some less common cranks with 3 arms that require the 3-arm chainring bolts. Specialites T.A. 'Professionel 5 Vis' and Stronglight '49D' type cranks require special 50.4 BCD chainring bolts that are specific to these crank designs.

Mount Type - most bolts simply fix the chainring to the crank, but some cranks require bolts to fix one chainring to another.

Back Nut Length (Excluding Head) - the more chainrings your crank has the longer the bolts and nuts need to be. We exclude the head part from the measurement (the bit that often sits recessed in back of the chainring).

Campagnolo Nuovo/Super Record / Gran Sport (754/755) 'Brev' Vintage Chainring Bolts Set

£29.75 £35.00

✓ Original parts - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Campagnolo Nuovo/Super Record / Gran Sport chainring bolts, hailing from Italy and in production from the 1970s to the 1980s. Made from steel and weighing in at 25 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong chainring bolts!

OVERVIEW

TECHNICAL INFO

▼SHIPPING, TAXES & RETURNS

---

We've been safely sending orders around the world since 2010. Orders are carefully packed, sent with tracking & insurance, and normally collected around midday on Tuesdays and Fridays. Larger items may occasionally require an extra day or two to prepare.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU orders under €150 (excluding shipping) - import VAT and the new €3 customs duty are paid as part of your order, so there's nothing further to pay on delivery.

EU orders over €150 (excluding shipping) - import fees are payable to the carrier before delivery, with nothing collected at checkout.

USA orders - import fees are collected at checkout for all orders to the USA, so there won’t be any surprise charges when your order arrives.

Other international orders - local import fees may apply and are not collected by us. Please check your country's import rules before purchasing.

▼HELP SECTION

---

Chainring Count - the number of chainrings the bolts are designed to fit, this must be the same as the number of chainrings you are using.

Crank Type - Most cranks require the standard 5-bolt sets that consist of 5 bolts with backs that slot into the rear of the crank spider, there are also some less common cranks with 3 arms that require the 3-arm chainring bolts. Specialites T.A. 'Professionel 5 Vis' and Stronglight '49D' type cranks require special 50.4 BCD chainring bolts that are specific to these crank designs.

Mount Type - most bolts simply fix the chainring to the crank, but some cranks require bolts to fix one chainring to another.

Back Nut Length (Excluding Head) - the more chainrings your crank has the longer the bolts and nuts need to be. We exclude the head part from the measurement (the bit that often sits recessed in back of the chainring).

Campagnolo Record (754/755) 'Patent' Early Type Vintage Chainring Bolts Set

£42.50 £50.00

✓ Original parts - in production from the 1950s to the 1960s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Campagnolo Record chainring bolts, hailing from Italy and in production from the 1950s to the 1960s. Made from steel and weighing in at 24 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike too.

If you're taking part in L'Eroica, Anjou Velo, Velo Retro or another similar vintage cycling event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong chainring bolts!

OVERVIEW